Suspension

Allstar External Bump Stop Kit Steel ALL56360 External bump stop allows adjustment of suspension travel separate from the coil-over unit. The detented adjuster nut can be turned on the rod end for quick engagement adjustment. Each half turn equals 1/16"...

AMC Pacer Spindle with 2" Lower B/J Taper ALL55961 The Pacer spindle is a modular design which allows the spindle to interchange from left to right by flipping the steering arm. Spindle features a 7° pin inclination and 1-1/2" per foot upper ball...

AMC Pacer Spindle with 1-1/2" Lower B/J Taper ALL55960 The Pacer spindle is a modular design which allows the spindle to interchange from left to right by flippingthe steering arm. Spindle features a 7° pin inclination and 1-1/2" per foot upper ball...

Allstar Dual Shock Workstation ALL64264 The all-in-one shock workstation holds most shock bodies in the upright position for ease of shaft removal or assembly and holds shock shafts vertical or horizontal for easier repairs and re-valving. Aluminum...

Allstar External Bump Stop Kit Aluminum ALL56361 External bump stop allows adjustment of suspension travel separate from the coil-over unit. The detented adjuster nut can be turned on the rod end for quick engagement adjustment. Each half turn equals...

Allstar Std Height Spindles Mustang II Pair ALL56307 Mustang II/Pinto spindles are direct replacements for stock O.E. spindles featuring the stock 10° pin inclination and upper and lower ball joint tapers. Spindles accept Granada or Hybrid style...

Allstar 2in Dropped Spindles Mustang II ALL56305 Mustang II/Pinto spindles are direct replacements for stock O.E. spindles featuring the stock 10° pin inclination and upper and lower ball joint tapers. Spindles accept Granada or Hybrid style rotors...

Allstar Steel Torque Absorber ALL56165 Steel torque absorber may be used as the upper third link, right rear trailing arm or Panhard bar to increase traction. Measures 7-1/2" between jam nuts and 10-3/8" end to end. Accepts 3/4" rod ends or suspension...

Allstar J-Bar Panhard Bar (Adj) w/ Aircraft Rod End ALL56142 Cut-to-fit bar is an unwelded kit offering the ability to build a custom length J-Bar with up to a 27" long center to center distance, enough to work with most chassis. Bar is formed from .250"...