Brakes

Alternate Description MOUNTING BRACKET FOR ALL48037 Part Number ALL48038 Vendor Part Number ALL48038 UPC Code 848238094701 Package Weight 0.39 lbs 0.17 kg Package Length 6.15 in 15.62 cm Package...

Allstar Master Cylinder 1in Bore 3/8in Ports Cast Iron ALL41060 Dual reservoir master cylinders have 1" bores and outlet ports on both sides for easy plumbing and installation. Popular master cylinders are used with disc/disc and disc/drum applications...

Allstar Combination Valve Disc/ Drum ALL41040 Multi-purpose valves are used in the brake system to properly distribute fluid to the front and rear brakes, meter the amount of fluid and pressure delivered to each brake and provide an option to connect a...

Allstar Distribution Block w/ Proportioning Valve ALL48037 Distribution block connects brake lines from the master cylinder to front and rear brakes with the added benefit of a rear proportioning valve and built-in pressure activated brake light switch...

Allstar 78-87 GM Metric Brake Pads ALL99157 Brake Pads, GM Metric Caliper, Allstar Mustang II Front Brake Kits, Set of 4 Product Info Alternate Description BRAKE PADS 1978-88 GM METRIC Part Number ALL99157 Vendor Part Number ...

Allstar Proportioning Valve ALL48025 Adjust front-to-rear brake bias with the twist of a knob. Provides up to 57% reduction. Fitting ports are 1/8"NPT. Valve includes two fittings to adapt to 3/16" brake line. 1" long, 1-3/4" wide and 3-5/16" tall. ...

Allstar Electrical Hardware Kit for Line Lock ALL48014 An electrically controlled valve that engages with a switch, holds pressure to the front brakes on drag race vehicles. Commonly used to prevent vehicles from rolling once they have staged or during...

Allstar Caliper Bracket Metric Clamp On w/ Gussets ALL42186 Made from 1/4" thick steel, brackets fit 3" diameter axle housings and work with 11.75" diameter rotors. Available for many setups Alternate Description CALIPER BRACKET METRIC CLAMP ON W/...

Allstar Caliper Bracket Metric Clamp On ALL42185 Made from 1/4" thick steel, brackets fit 3" diameter axle housings and work with 11.75" diameter rotors. Available for many setups Alternate Description CALIPER BRACKET METRIC CLAMP ON Part...

Allstar Caliper Bracket Right Rear GM 7.5 ALL42181 Steel bolt-on brackets are used when converting drum brake equipped 7.5" GM style rear ends to disc brakes. 1/4" thick brackets replace the drum brake backing plates to provide secure mounting for...

Allstar Caliper Bracket Left Rear GM 7.5 ALL42180 Steel bolt-on brackets are used when converting drum brake equipped 7.5" GM style rear ends to disc brakes. 1/4" thick brackets replace the drum brake backing plates to provide secure mounting for...

Allstar Hybrid Brake Bracket Right ALL42119 Install smaller hybrid style rotors and intermediate GM metric style calipers on stock height or lowered Mustang II spindles with these bolt-on caliper brackets. Lightweight steel brackets weigh just one pound...