Brakes

Allstar Master Cylinder 1in Bore 3/8in Ports Cast Iron ALL41060 Dual reservoir master cylinders have 1" bores and outlet ports on both sides for easy plumbing and installation. Popular master cylinders are used with disc/disc and disc/drum applications...

Allstar Combination Valve Disc/ Drum ALL41040 Multi-purpose valves are used in the brake system to properly distribute fluid to the front and rear brakes, meter the amount of fluid and pressure delivered to each brake and provide an option to connect a...

Allstar Distribution Block w/ Proportioning Valve ALL48037 Distribution block connects brake lines from the master cylinder to front and rear brakes with the added benefit of a rear proportioning valve and built-in pressure activated brake light switch...

Allstar Hub/Rotor Hybrid 5x5in ALL42094 The hybrid rotor combines the versatility of the Granada style hub with a reduced diameter and width. Rotor is a popular choice when used with Mustang II spindles, metric style brake calipers and hybrid caliper...

Allstar Rotor Hat 2.5in Aluminum ALL42129 Cast aluminum hats are available in two offsets, fits 8-bolt rotors with 7" bolt circle mount, have a 3.060" dia. centering hole and fit axle flanges with up to 6.050" diameter. Drilled for use with 1/2" wheel...

Allstar Rotor Hat 3in Aluminum ALL42128 Cast aluminum hats are available in two offsets, fits 8-bolt rotors with 7" bolt circle mount, have a 3.060" dia. centering hole and fit axle flanges with up to 6.050" diameter. Drilled for use with 1/2" wheel...

Allstar GM Caliper Large LH 73-77 ALL42082 Stock style calipers are perfect replacements on most GM vehicles and will fit up to 1" wide rotor. Metric inlet thread is 10mm x 1.50 pitch. Big GM inlet thread is 7/16"-20. Alternate Description GM...

Allstar GM Caliper Large RH 73-77 ALL42081 Stock style calipers are perfect replacements on most GM vehicles and will fit up to 1" wide rotor. Metric inlet thread is 10mm x 1.50 pitch. Big GM inlet thread is 7/16"-20. Alternate Description GM...

Allstar Master Cylinder 1-1/4in Bore 3/8in/1/2in Ports ALL41064 Master cylinder with large 1-1/4" bore works well on vehicles that require increased volume for proper braking or as an option when experiencing excessive pedal travel with standard 1" bore...

Allstar Master Cylinder 1in Bore 1/2in/9/16in Ports Cast ALL41062 Dual reservoir master cylinders have 1" bores and outlet ports on both sides for easy plumbing and installation. Popular master cylinders are used with disc/disc and disc/drum applications...

Allstar Combination Valve Disc/ Disc ALL41042 Multi-purpose valves are used in the brake system to properly distribute fluid to the front and rear brakes, meter the amount of fluid and pressure delivered to each brake and provide an option to connect a...

Allstar Brake Pedal Asy Universal Frame Mount ALL41015 Pedal assemblies are commonly used when converting under-floor standard single reservoir master cylinder to a power, dual reservoir master cylinder brake system. Pedal assemblies accept Allstar 7"...