Brakes

Allstar In-line Blower 3in HD ALL13008 Many uses include cooling brake systems or assisting helmet cooling efforts. CFM ratings at 13.6 volts with a 3.5 amp draw. Alternate Description IN-LINE BLOWER 3IN HD Part Number ALL13008 Vendor...

Allstar Proportioning Valve ALL48025 Adjust front-to-rear brake bias with the twist of a knob. Provides up to 57% reduction. Fitting ports are 1/8"NPT. Valve includes two fittings to adapt to 3/16" brake line. 1" long, 1-3/4" wide and 3-5/16" tall. ...

Allstar Brake Duct Hose Flange 3in. ALL42160 Flange rivets to nosepiece. 3" diameter brake duct hose can then be hose clamped to flange. Alternate Description BRAKE DUCT HOSE FLANGE 3IN. Part Number ALL42160 Vendor Part Number ...

Allstar Spindle Duct RH LW ALL42117 Aluminum 3" ducts fit most fabricated spindles. Available in dual inlet, light or heavy duty single inlet. Alternate Description SPINDLE DUCT RH LW Part Number ALL42117 Vendor Part Number ALL42117 ...

Allstar Spindle Duct LH LW ALL42116 Aluminum 3" ducts fit most fabricated spindles. Available in dual inlet, light or heavy duty single inlet. Alternate Description SPINDLE DUCT LH LW Part Number ALL42116 Vendor Part Number ALL42116 ...

Allstar Caliper Bracket S/Lite Clamp On ALL42109 Made from 1/4" thick steel, brackets fit 3" diameter axle housings and work with 11.75" diameter rotors. Available for many setups. Alternate Description CALIPER BRACKET S/LITE CLAMP ON Part...

Allstar Pedal Extension Kit 4in Single Master Cylinder ALL41055 Kits move floor mounted pedals closer to the driver and eliminate the need for extra long seat brackets used to move the driver forward. Now just leave the seat in the desired location and...

Allstar Pedal Extension Kit 2in Single Master Cylinder ALL41054 Kits move floor mounted pedals closer to the driver and eliminate the need for extra long seat brackets used to move the driver forward. Now just leave the seat in the desired location and...

Allstar In-line Blower 3in ALL13010 Many uses include cooling brake systems or assisting helmet cooling efforts. Alternate Description IN-LINE BLOWER 3IN Part Number ALL13010 Vendor Part Number ALL13010 UPC Code 848238003727 ...

Allstar In-line Blower 4in HD ALL13009 Many uses include cooling brake systems or assisting helmet cooling efforts. CFM ratings at 13.6 volts with a 3.5 amp draw. Alternate Description IN-LINE BLOWER 4IN HD Part Number ALL13009 Vendor...

Allstar GM Brake Rotor Rear ALL42095 Brake Rotor - 11.625 in OD - 0.790 in Thick - 5 x 4.75 in Bolt Pattern - Iron - Each Alternate Description GM BRAKE ROTOR REAR Part Number ALL42095 Vendor Part Number ALL42095 UPC Code ...

Allstar DOT Brake Hose Kit Large GM ALL42033 Brake Hose Kit - 16 in Long - 3 AN Straight Inlet - 3 AN Straight Outlet - Fittings / Tabs - Braided Stainless - Big GM Calipers - Kit Alternate Description DOT BRAKE HOSE KIT LARGE GM Part Number ...