Suspension

Allstar External Bump Stop Kit Steel ALL56360 External bump stop allows adjustment of suspension travel separate from the coil-over unit. The detented adjuster nut can be turned on the rod end for quick engagement adjustment. Each half turn equals 1/16"...

Allstar Passenger Side 77-96 Impala Spindle ALL55989 Direct replacement OE spindle for the #2 1977-96 Impalas, which is a popular choice on asphalt sportsman and modifieds requiring more brake. Spindle accepts the larger 11-7/8" x .970 rotor with the 5x5...

Allstar Driver Side 77-96 Impala Spindle ALL55988 Direct replacement OE spindle for the #2 1977-96 Impalas, which is a popular choice on asphalt sportsman and modifieds requiring more brake. Spindle accepts the larger 11-7/8" x .970 rotor with the 5x5...

Allstar Mustang II Spindle 10 Deg RH ALL55999 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors...

Allstar Mustang II Spindle 10 Deg LH ALL55998 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors...

Allstar Mustang II Spindle 10 Deg RH ALL55997 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors...

Allstar Mustang II Spindle 10 Deg LH ALL55996 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors...

Allstar Mustang II Spindle 8 Deg RH ALL55995 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors with...

Allstar Mustang II Spindle 8 Deg LH ALL55994 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors with...

Allstar Suspension Limiter Chain Clamp Steel 3IN ALL68332 1- Piece bearing style clamp slides over the end of most 3" O.D. axle tubes providing a lower mounting point for a suspension limit chain. Product Info Alternate Description LIMIT...

Allstar Suspension Limiter Chain Clamp Powder Coat 3IN ALL68336 2-Piece clamp bolts around most 3" O.D. axle tubes providing a lower mounting point for a suspension limit chain. Two piece design features a nylon liner allowing clamp to be installed...

Allstar Suspension Limiter Dual Bushing ALL64302 Single bushing suspension limiter is commonly used on the chassis LR or RR to limit travel during acceleration “hike up” and control roll steer. Dual bushing limiter is often used on the lift...