Allstar Rotor Hat 3in Aluminum ALL42128 Cast aluminum hats are available in two offsets, fits 8-bolt rotors with 7" bolt circle mount, have a 3.060" dia. centering hole and fit axle flanges with up to 6.050" diameter. Drilled for use with 1/2" wheel...

Allstar Hub/Rotor M/C 1982-88 5 on 5.00in BC ALL42088 New stock replacement brake rotor includes new bearing races and studs for most intermediate sized Metric chassis cars including Monte Carlo, Grand Prix, and Regal. Rotors measure 10.5" O.D. x 1.03"...

Allstar GM Caliper Large LH 73-77 ALL42082 Stock style calipers are perfect replacements on most GM vehicles and will fit up to 1" wide rotor. Metric inlet thread is 10mm x 1.50 pitch. Big GM inlet thread is 7/16"-20. Alternate Description GM...

Allstar GM Caliper Large RH 73-77 ALL42081 Stock style calipers are perfect replacements on most GM vehicles and will fit up to 1" wide rotor. Metric inlet thread is 10mm x 1.50 pitch. Big GM inlet thread is 7/16"-20. Alternate Description GM...

Allstar Brake Bias Adjuster Short 3/8in ALL42074 Know exactly where brake adjustments are set, no more guessing the correct setting. When the adjusting knob is turned, the pointer moves along the reference scale. Adjuster body can be pivoted for easy...

Allstar Reservoir Dual Outlet ALL42046 High-impact plastic remote reservoirs simplify brake bleeding, especially when master cylinder is mounted low in the chassis. Available with single or dual outlet and may be connected to master cylinder with a 5/16"...

Allstar Rotor Steel 8 Bolt .250 Scalloped ALL42011 Lightweight solid rotor for Late Models and Modifieds. Use anywhere reduction of un-sprung weight is desirable. Rotor is scalloped to provide maximum weight loss without compromising braking performance...

Allstar Rotor RH 8 Bolt 40 Vane 1.25x11.75 Vented ALL42005 Heavy duty 40 vane brake rotors provide added strength and cooling over standard 36 vane rotors. 11.75" x 1.25" 8 bolt rotors weigh just 11 pounds and have ball milled slots to keep rotor clean. ...

Allstar Rotor LH 8 Bolt 40 Vane 1.25x11.75 Vented ALL42004 Heavy duty 40 vane brake rotors provide added strength and cooling over standard 36 vane rotors. 11.75" x 1.25" 8 bolt rotors weigh just 11 pounds and have ball milled slots to keep rotor clean. ...

Allstar Rotor RH 8 Bolt 36 Vane 1.25x11.75 ALL42001 Rotors have 36 directional cooling vanes and are 1-1/4" thick x 11-3/4" dia. Directional cooling vanes allow brakes to run much cooler than conventional rotor designs. Rotors fit solid mounting brake...

Allstar Rotor LH 8 Bolt 36 Vane 1.25x11.75 ALL42000 Rotors have 36 directional cooling vanes and are 1-1/4" thick x 11-3/4" dia. Directional cooling vanes allow brakes to run much cooler than conventional rotor designs. Rotors fit solid mounting brake...

Allstar Master Cylinder 1-1/4in Bore 3/8in/1/2in Ports ALL41064 Master cylinder with large 1-1/4" bore works well on vehicles that require increased volume for proper braking or as an option when experiencing excessive pedal travel with standard 1" bore...