Chassis

Allstar Alum Body Angle 120 Deg 26in ALL23130 Aluminum angle has many uses including strengthening body panels and providing a mounting point for strapping or body braces, typically used on the lower section of rear quarter panels. 120 degree angle...

Allstar Alum Angle Slotted 1/8x1x72 ALL23124 Slotted angle aluminum brace connects and strengthens body panels. Brace is 1/8" thick x 1" wide x 72" long with 3/8" x 5/8" slots. Ideal for use along tops of spoilers. Alternate Description ALUM...

Allstar Alum Rear Roof Support 1/8x7/8x42 ALL23122 Drilled and slotted aluminum support adds strength to dirt late model and modified rear roof area. Support is 42" long x 7/8" wide x 1/8" thick and has 1/4" x 1/2" slots on 1" centers. Alternate...

Allstar 12pt Strut Bars 1pr ALL22642 Strut bars increase the rigidity and strength of a chassis eliminating flexing and increasing reaction times. Bars can be installed as an upgrade to existing ten point cage kits or when building a new chassis...

Allstar Floor Plates 6in x 6in 6pk ALL22640 Bolt or weld these steel plates to the floor pan as required by most sanctioning bodies when installing roll bars into unibody cars. Increase the structural integrity and provide a solid mounting point for the...

Allstar Right Door Bar Rocket ALL22392 ALL22390/22391 three-point door bar mounts are constructed of 1" steel tubing and bolt to the frame. Each mount has a pre-welded sleeve sized to accept posts of the ALL22392 door bar, 5' L x 1-1/4" steel. ...

Allstar Rear Door Bar Mount Rocket ALL22391 ALL22390/22391 three-point door bar mounts are constructed of 1" steel tubing and bolt to the frame. Each mount has a pre-welded sleeve sized to accept posts of the ALL22392 door bar, 5' L x 1-1/4" steel. ...

Allstar Front Door Bar Mount Rocket ALL22390 ALL22390/22391 three-point door bar mounts are constructed of 1" steel tubing and bolt to the frame. Each mount has a pre-welded sleeve sized to accept posts of the ALL22392 door bar, 5' L x 1-1/4" steel. ...

Allstar Steel End Caps 2x3 10pk ALL22294 Steel end caps weld to the end or inside of tubing to provide a clean look, prevent sharp exposed edges and seal tubes to keep out dirt and debris. Caps are commonly used on ends of bumpers, to fill existing holes...

Allstar Steel End Caps 2x2 Sq. 10pk ALL22292 Steel end caps weld to the end or inside of tubing to provide a clean look, prevent sharp exposed edges and seal tubes to keep out dirt and debris. Caps are commonly used on ends of bumpers, to fill existing...

Allstar Steel End Caps 1.5x1.5 10pk ALL22291 Steel end caps weld to the end or inside of tubing to provide a clean look, prevent sharp exposed edges and seal tubes to keep out dirt and debris. Caps are commonly used on ends of bumpers, to fill existing...

Allstar Steel End Caps 1x1 Sq. 10pk ALL22290 Steel end caps weld to the end or inside of tubing to provide a clean look, prevent sharp exposed edges and seal tubes to keep out dirt and debris. Caps are commonly used on ends of bumpers, to fill existing...