Suspension

Allstar Steel Torque Absorber ALL56165 Steel torque absorber may be used as the upper third link, right rear trailing arm or Panhard bar to increase traction. Measures 7-1/2" between jam nuts and 10-3/8" end to end. Accepts 3/4" rod ends or suspension...

Allstar J-Bar Panhard Bar (Adj) w/ Aircraft Rod End ALL56142 Cut-to-fit bar is an unwelded kit offering the ability to build a custom length J-Bar with up to a 27" long center to center distance, enough to work with most chassis. Bar is formed from .250"...

Allstar Adj Sway Bar Bolt Kit 1.5in Swivel Eye ALL56103 Kit includes a 3-5/8" long sleeve that welds into frame rail with a locking collar to prevent movement. Adjustment bolt has 4" of travel and adjusts with a 1/2" square drive ratchet. Inside eye...

Allstar Mustang II Spindle 8 Deg RH 2in Tapered Lower ALL55993 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid...

Allstar Mustang II Spindle 8 Deg LH 2in Tapered Lower ALL55992 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid...

Allstar Mustang II Spindle 8 Deg RH ALL55991 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors with...

Allstar Mustang II Spindle 8 Deg LH ALL55990 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors with...