Suspension

Allstar External Bump Stop Kit Steel ALL56360 External bump stop allows adjustment of suspension travel separate from the coil-over unit. The detented adjuster nut can be turned on the rod end for quick engagement adjustment. Each half turn equals 1/16"...

Allstar Mustang II Spindle 10 Deg RH ALL55999 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors...

Allstar Mustang II Spindle 10 Deg LH ALL55998 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors...

Allstar Mustang II Spindle 10 Deg LH ALL55996 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors...

Allstar Mustang II Spindle 8 Deg RH ALL55995 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors with...

Allstar Mustang II Spindle 8 Deg LH ALL55994 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors with...

AMC Pacer Spindle with 2" Lower B/J Taper ALL55961 The Pacer spindle is a modular design which allows the spindle to interchange from left to right by flipping the steering arm. Spindle features a 7° pin inclination and 1-1/2" per foot upper ball...

AMC Pacer Spindle with 1-1/2" Lower B/J Taper ALL55960 The Pacer spindle is a modular design which allows the spindle to interchange from left to right by flippingthe steering arm. Spindle features a 7° pin inclination and 1-1/2" per foot upper ball...

Allstar Dual Shock Workstation ALL64264 The all-in-one shock workstation holds most shock bodies in the upright position for ease of shaft removal or assembly and holds shock shafts vertical or horizontal for easier repairs and re-valving. Aluminum...

Allstar Trailing Arm Bracket Kit Multi-Hole ALL60054 Includes rear upper and lower control arm mounts. Upper mount must be cut to desired height depending upon where housing is located in the chassis. Alternate Description TRAILING ARM BRACKET...

Allstar Trailing Arm Bracket Kit 1 Hole Lowered ALL60053 Includes rear upper and lower control arm mounts. Upper mount must be cut to desired height depending upon where housing is located in the chassis. Alternate Description TRAILING ARM...

Allstar Trailing Arm Bracket Kit 1 Hole Stock ALL60052 Includes rear upper and lower control arm mounts. Upper mount must be cut to desired height depending upon where housing is located in the chassis. Alternate Description TRAILING ARM BRACKET...