Engine & Exhaust

Allstar 1:1 Water Pump Pulley ALL31085 Double groove aluminum pulley kits include belts, crank pulley and water pump pulley with a 5/8" diameter hole. Components also sold separately. Alternate Description 1:1 WATER PUMP PULLEY Part Number ...

Allstar 1:1 Pulley Kit for use w/o Power Steering ALL31083 Double groove aluminum pulley kits include belts, crank pulley and water pump pulley with a 5/8" diameter hole. Components also sold separately. Alternate Description 1:1 PULLEY KIT FOR...

Allstar Pulley Shim Kit Crank ALL31066 Use shim kits to properly align pulleys. Water pump shims have dual bolt hole pattern to fit most GM and Ford water pumps. Crank pulley spacers are for small block Chevy's. Kits include three shims. Alternate...

Allstar Pulley Shim Kit Water Pump ALL31064 Use shim kits to properly align pulleys. Water pump shims have dual bolt hole pattern to fit most GM and Ford water pumps. Crank pulley spacers are for small block Chevy's. Kits include three shims. ...

Allstar Water Pump Pulley 6.625in Dia 3/4in Pilot ALL31050 Specifically for short or Corvette water pumps, pulleys work with power steering pump and pulley to provide a ratio within the GM specified RPM range. Race engine RPM differs greatly from street...

Allstar Water Pump Pulley 6.625in Dia 5/8in Pilot ALL31040 Specifically for short or Corvette water pumps, pulleys work with power steering pump and pulley to provide a ratio within the GM specified RPM range. Race engine RPM differs greatly from street...

Allstar Pulley Guide (Each) ALL31035 Hard-coated aluminum pulley guide helps retain drive belt. Guide is .085" thick with a 1.00" ID, 1/8" keyway slot, and a 2.500" OD. The same guide is found in ALL31031 Mandrel Kits. Sold each. Alternate...

Allstar Stepped Washer For 31030 Pulley ALL31034 Kit prevents mandrel bolt breakage and is made specifically for use with Allstar ALL31030 crank pulley. Mandrel is attached to the crankshaft pulley with three bolts, while the vibration damper is retained...

Allstar Crank Pulley Mandrel ALL31032 Kit prevents mandrel bolt breakage and is made specifically for use with Allstar ALL31030 crank pulley. Mandrel is attached to the crankshaft pulley with three bolts, while the vibration damper is retained with the...

Allstar Crank Pulley 2 Groove 4.750in Dia ALL31030 Specifically for short or Corvette water pumps, pulleys work with power steering pump and pulley to provide a ratio within the GM specified RPM range. Race engine RPM differs greatly from street engines...

Allstar Carburetor Rebuild Stand ALL26200 Aluminum stand simplifies carb maintenance and will hold carb off of work bench surface. Works with Edelbrock, Quadrajet, and Holley 2- and 4-barrel carbs (except 4500 series). Alternate Description ...

Allstar Valve Covers SBC Steel Black w/Tubes ALL26147 Steel small block Chevy valve covers are an excellent alternative to more expensive and heavier aluminum valve covers. Sold in pairs, one cover is solid without holes and one cover includes two fully...