Suspension

Allstar External Bump Stop Kit Steel ALL56360 External bump stop allows adjustment of suspension travel separate from the coil-over unit. The detented adjuster nut can be turned on the rod end for...

Allstar Mustang II Spindle 10 Deg RH ALL55999 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint...

Allstar Mustang II Spindle 10 Deg LH ALL55998 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint...

Allstar Mustang II Spindle 10 Deg LH ALL55996 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint...

Allstar Mustang II Spindle 8 Deg RH ALL55995 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint...

Allstar Mustang II Spindle 8 Deg LH ALL55994 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint...

AMC Pacer Spindle with 2" Lower B/J Taper ALL55961 The Pacer spindle is a modular design which allows the spindle to interchange from left to right by flipping the steering arm. Spindle features a 7°...

AMC Pacer Spindle with 1-1/2" Lower B/J Taper ALL55960 The Pacer spindle is a modular design which allows the spindle to interchange from left to right by flippingthe steering arm. Spindle features a...

Allstar Suspension Limiter Chain Clamp Steel 3IN ALL68332 1- Piece bearing style clamp slides over the end of most 3" O.D. axle tubes providing a lower mounting point for a suspension limit chain. ...

Allstar Suspension Limiter Chain Clamp Powder Coat 3IN ALL68336 2-Piece clamp bolts around most 3" O.D. axle tubes providing a lower mounting point for a suspension limit chain. Two piece design...

Allstar 6th Coil Unit ALL64315 Unit bolts in the center of the chassis to 1-1/2" tubing and the bottom connects to the front of a lift bar using the supplied 18" long chain which accepts 3/8"...

Allstar Dual Shock Workstation ALL64264 The all-in-one shock workstation holds most shock bodies in the upright position for ease of shaft removal or assembly and holds shock shafts vertical or...