Suspension

Allstar J-Bar Panhard Bar 20-1/2 Adjustable 6in Drop ALL56154 Bars are formed from 1-1/2" steel tubing and mount to the pinion rather than the axle tube to maintain adequate driveshaft clearance. J-bars have 3/4" rods ends and allow up to 2" of...

Allstar J-Bar Panhard Bar 18-1/2 Adjustable 6in Drop ALL56153 Bars are formed from 1-1/2" steel tubing and mount to the pinion rather than the axle tube to maintain adequate driveshaft clearance. J-bars have 3/4" rods ends and allow up to 2" of...

Allstar J-Bar Panhard Bar (Adj) w/ Aircraft Rod End ALL56142 Cut-to-fit bar is an unwelded kit offering the ability to build a custom length J-Bar with up to a 27" long center to center distance, enough to work with most chassis. Bar is formed from .250"...

Allstar J-Bar Panhard Bar (Adj) w/ Std Rod End ALL56141 Cut-to-fit bar is an unwelded kit offering the ability to build a custom length J-Bar with up to a 27" long center to center distance, enough to work with most chassis. Bar is formed from .250" wall...

Allstar Adj Sway Bar Bolt Kit 1.5in Swivel Eye ALL56103 Kit includes a 3-5/8" long sleeve that welds into frame rail with a locking collar to prevent movement. Adjustment bolt has 4" of travel and adjusts with a 1/2" square drive ratchet. Inside eye...

Allstar Mustang II Spindle 8 Deg RH 2in Tapered Lower ALL55993 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid...

Allstar Mustang II Spindle 8 Deg LH 2in Tapered Lower ALL55992 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid...

Allstar Mustang II Spindle 8 Deg RH ALL55991 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors with...

Allstar Mustang II Spindle 8 Deg LH ALL55990 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors with...

Allstar Shock Rack Adjustable ALL12211 Shock rack holds four shocks with 2.5" springs and easily mounts to trailer, shop wall or pit cart. Rack is designed to hold shocks in place by pushing shock rod end or eye over the outer O-ring or alternatively,...

Allstar Performance Adjustable Top Link Spacer Kit ALL60178 Kit includes two adjustable spacers to place on each side of your top link, pull bar or third link. Aluminum spacers feature a threaded body that may be adjusted as needed to locate top link...