Suspension

Allstar Adj Upper Ball Joint LH LG GM Angled ALL56260 With mono-ball joints, upper control arm angles can be adjusted. Joints include plate, ball, tapered shaft, adjuster bushings and nut. Alternate Description ADJ UPPER BALL JOINT LH LG GM ANGLED...

Allstar Steel Torque Absorber ALL56165 Steel torque absorber may be used as the upper third link, right rear trailing arm or Panhard bar to increase traction. Measures 7-1/2" between jam nuts and 10-3/8" end to end. Accepts 3/4" rod ends or suspension...

Allstar J-Bar Panhard Bar 20-1/2 Adjustable 4in Drop ALL56156 Bars are formed from 1-1/2" steel tubing and mount to the pinion rather than the axle tube to maintain adequate driveshaft clearance. J-bars have 3/4" rods ends and allow up to 2" of...

Allstar J-Bar Panhard Bar 18-1/2 Adjustable 4in Drop ALL56155 Bars are formed from 1-1/2" steel tubing and mount to the pinion rather than the axle tube to maintain adequate driveshaft clearance. J-bars have 3/4" rods ends and allow up to 2" of...

Allstar J-Bar Panhard Bar 20-1/2 Adjustable 6in Drop ALL56154 Bars are formed from 1-1/2" steel tubing and mount to the pinion rather than the axle tube to maintain adequate driveshaft clearance. J-bars have 3/4" rods ends and allow up to 2" of...

Allstar J-Bar Panhard Bar 18-1/2 Adjustable 6in Drop ALL56153 Bars are formed from 1-1/2" steel tubing and mount to the pinion rather than the axle tube to maintain adequate driveshaft clearance. J-bars have 3/4" rods ends and allow up to 2" of...

Allstar J-Bar Panhard Bar (Adj) w/ Aircraft Rod End ALL56142 Cut-to-fit bar is an unwelded kit offering the ability to build a custom length J-Bar with up to a 27" long center to center distance, enough to work with most chassis. Bar is formed from .250"...

Allstar Adj Sway Bar Bolt Kit 1.5in Swivel Eye ALL56103 Kit includes a 3-5/8" long sleeve that welds into frame rail with a locking collar to prevent movement. Adjustment bolt has 4" of travel and adjusts with a 1/2" square drive ratchet. Inside eye...

Allstar Mustang II Spindle 8 Deg RH 2in Tapered Lower ALL55993 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid...

Allstar Mustang II Spindle 8 Deg LH 2in Tapered Lower ALL55992 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid...

Allstar Mustang II Spindle 8 Deg RH ALL55991 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors with...

Allstar Mustang II Spindle 8 Deg LH ALL55990 Mustang II/Pinto spindles are stock appearing and available with 10 Degree (OE) or 8 Degree pin inclination and 1-1/2" or 2" per foot lower ball joint taper. Spindles accept Granada or Hybrid style rotors with...