Chassis

Allstar 1/8in Flat Tab 3/8 Hole 4pk ALL60076 Mild steel flat tabs have a straight edge and can be welded parallel to round tubing, square tubing or flat plate. Alternate Description 1/8IN FLAT TAB 3/8 HOLE 4PK Part Number ALL60076 ...

Allstar Tie Down Chassis Rings 2pk ALL60075 Steel brackets weld to chassis and provide a secure mounting location to hook a tie down strap or winch cable. Set of 2. Alternate Description TIE DOWN CHASSIS RINGS 2PK Part Number ALL60075 ...

Allstar D-Ring Backing Plate ALL60074 Backing plate strengthens and reinforces the mounting area of Allstar recessed D-rings. Plate may also be used as a template when installing D-rings and is bare steel allowing plate to be welded in place...

Allstar Universal Chassis Mount ALL60072 Universal formed bracket is 1/8" thick and welds on for many uses including a body mount when modifying or fabricating chassis or as a rear engine mount bracket when used with rear motor mounts. Bracket is 2-1/4"...

Allstar Universal Chassis Mount 1/2in Hole ALL60068 Universal gusseted bracket is 3/16" thick and welds on for many uses including engine and body mounts. Bracket is 2-1/4" wide x 3-1/4" long and has a 1/2" hole located 1" from the end of the bracket. ...

Allstar Universal Hood Pin Mount 1/2in Hole ALL60067 Universal bracket with 1/4" mounting holes can be bolted on or welded in place. Bracket accepts 1/2" hood pins to secure hood and deck lids along with many other uses. Constructed of .100" steel,...

Allstar Upper Link Chassis Brkt ALL60066 Weld-on brackets have curved 3/4" slots to maintain pinion angle as the 3rd link is raised or lowered. Both brackets are notched for 1-3/4" round tubing and are 3/16" thick. Alternate Description UPPER...

Allstar Upper Link Chassis Brkt ALL60065 Weld-on brackets have curved 3/4" slots to maintain pinion angle as the 3rd link is raised or lowered. Both brackets are notched for 1-3/4" round tubing and are 3/16" thick. Alternate Description UPPER...

Allstar 1/8in Radius Tabs 1/4in Hole 4pk ALL60041 Mild steel tabs have built-in gussets for added support. Choose tabs that mount parallel or perpendicular to tubing. Package of four. Alternate Description 1/8IN RADIUS TABS 1/4IN HOLE 4PK ...

Allstar Seat Bracket Bottom ALL60033 Made from 1/8" thick mild steel. Upper bracket is angled to fit against the back of most aluminum racing seats, two-piece design allows front-to-back and side-to-side adjustment. Upper mount brackets may be bolted or...

Allstar Seat Brackets Top 2pc ALL60032 Made from 1/8" thick mild steel. Upper bracket is angled to fit against the back of most aluminum racing seats, two-piece design allows front-to-back and side-to-side adjustment. Upper mount brackets may be bolted...

Allstar Seat Belt Tab Double Shear ALL60031 Bracket welds to chassis for solid seat belt mount to the chassis, yet still able to pivot. Double shear design provides twice the strength of a single tab style mount. Steel bracket accepts 1/2" hardware...