Tools & Shop

Allstar Repl ALL10122 Drill Bits 2pk ALL99102 Drill Bit, 1/16 in OD, Steel, Allstar Safety Wire Drill Fixtures, Pair Alternate Description REPL ALL10122 DRILL BITS 2PK Part Number ALL99102 Vendor Part Number ALL99102 UPC Code ...

Allstar Compression Tester gauge ALL96520 Tester checks cylinder compression from 0 to 300 psi and features an air-hold valve to reset gauge. One piece stepped brass end fitting with o-rings fits 14mm and 18mm spark plug threads. Easy to read 2-1/2" dial...

Allstar Spark Plug Index Tool ALL96510 Indexing positions the ground strap of the spark plug properly for best piston dome clearance and unshrouds the electrode for a more even burn and possible gains of 5-15 horsepower. Works with flat gasket or taper...

Allstar Freeze Plug Driver 1-3/4in ALL96485 Have problems installing freeze plugs? Use these plastic drivers for simple installation without damaging the plugs or the block. Three sizes per set: 1-1/2", 1-5/8", 1-3/4". Alternate Description FREEZE...

Allstar Freeze Plug Driver 1-5/8in ALL96484 Have problems installing freeze plugs? Use these plastic drivers for simple installation without damaging the plugs or the block. Three sizes per set: 1-1/2", 1-5/8", 1-3/4". Alternate Description FREEZE...

Allstar Freeze Plug Driver 1-1/2in ALL96483 Have problems installing freeze plugs? Use these plastic drivers for simple installation without damaging the plugs or the block. Three sizes per set: 1-1/2", 1-5/8", 1-3/4". Alternate Description FREEZE...

Allstar Rod Guide Extensions 4.5in 1pr ALL96481 Plastic tool slips over 3/8" or 7/16" rod bolts to aid piston installation and eliminate the chance of rod bolts hitting crank. A must for any engine builders toolbox. Alternate Description ROD GUIDE...

Allstar Rod Guide Tool ALL96480 Plastic tool slips over 3/8" or 7/16" rod bolts to aid piston installation and eliminate the chance of rod bolts hitting crank. A must for any engine builder’s toolbox. Alternate Description ROD GUIDE TOOL ...

Allstar Plastigage Kit ALL96475 Plastigage® strings are a simple and accurate way to verify crankshaft, main and rod bearing clearances. Kit includes two green .001" to .003" and one red .002" to .006" (12" long strings) individually packaged inside...

Allstar SB Chevy Cam Bearing Tool ALL96470 For installing cam bearings quickly and easily without damage. Shaft is steel; pilot and driver are aluminum. Alternate Description SBC CAM BEARING TOOL Part Number ALL96470 Vendor Part Number ...

Allstar Flywheel Locking Tool SBC/BBC ALL96426 Place flywheel locking tool onto rear block dowel pins to prevent the flywheel from turning while tightening or loosening balancer bolts, flywheel bolts, clutch/pressure plate bolts or cam gear bolts...

Allstar SBC Crank Socket ALL96424 Steel socket for rotating the crankshaft during engine assembly features a 1" hex and a 1/2" ratchet drive. Alternate Description SBC CRANK SOCKET Part Number ALL96424 Vendor Part Number ALL96424 ...