Frequently bought together:
Description
Allstar Inner Axle Snout Seal ALL72142
Seal is pressed into the outer end of a 5x5 axle tube snout (2.5") to help prevent differential lube from entering the outer wheel bearing area and contaminating the wheel bearing grease. Seal has an outer diameter of 1.875" and an inner diameter of approximately 1.325".
| Alternate Description | INNER AXLE SNOUT SEAL | ||
| Part Number | ALL72142 | ||
| Vendor Part Number | ALL72142 | ||
| UPC Code | 848238057928 | ||
| Package Weight |
| ||
| Package Length |
| ||
| Package Width |
| ||
| Package Height |
|
Spec Sheet
WARNING: These products may contain a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Related Products
Axle Snout Seal 1.875in OD 1.250in ID ALL72141
Allstar Performance
$8.99
Alternate Description AXLE SNOUT SEAL 1.875 OD X 1.250 ID Part N
Universal Inner Axle Seal Double Lip ALL72099
Allstar Performance
$39.99
Allstar Universal Inner Axle Seal Double Lip ALL72099 Place seal inside the axle tube near the center section to keep rear end lube in the center section area of most floating axle style rear end...
Replacement Inner Seal ALL72108
Allstar Performance
$9.99
Allstar Replacement Inner Seal ALL72108 Internal seals prevent gear lube from leaking into axle tube to eliminate premature rear end failure. Seal housings are O-ring type with spring loaded seals...
Axle Tube Oil Seal ALL72140
Allstar Performance
$5.99
Allstar Axle Tube Oil Seal ALL72140 Also called a spool seal, it fits Frankland, Winters and other quick change rear ends. Seal is pressed into side bell or axle tube and seats against the bearing...
Weld On Snout Wide 5 ALL68300
Allstar Performance
$51.99
Allstar Weld On Snout Wide 5 ALL68300 Weld-on snouts may be used for repairing existing axle tubes or custom building new tubes. Three hub styles are available. Alternate Description
Weld On Snout 5x5 2.0in Pin ALL68302
Allstar Performance
$51.99
Allstar Weld On Snout 5x5 2.0in Pin ALL68302 Weld-on snouts may be used for repairing existing axle tubes or custom building new tubes. Three hub styles are available. Alternate Descriptio
Weld On Snout 5x5 2.5in Pin RH Thread ALL68304
Allstar Performance
$51.99
Allstar Weld On Snout 5x5 2.5in Pin RH Thread ALL68304 Weld-on snouts may be used for repairing existing axle tubes or custom building new tubes. Three hub styles are available. Alternate
9in Floater Bare Housing 2.5in GN Snouts 60in Canter ALL68822
Allstar Performance
$499.99
Allstar Allstar 9in Floater Bare Housing 2.5in GN Snouts 60in Ctr ALL68822 Housings are jig welded for correct alignment using all new components including a fabricated center section, new 3" O.D. x...
9in Floater Bare Housing 2.5in GN Snouts 62in Canter ALL68824
Allstar Performance
$499.99
Allstar Ford 9IN Housing 62IN Wide Centered GN Snouts ALL68824 Housings are jig welded for correct alignment using all new components including a fabricated center section, new 3" O.D. x 3/16" wall...