Engine

Allstar Exhaust Shield Oval Dual Angle Exit ALL34182 Aluminum shields protect body panels from exhaust exiting thru the passenger door and provide a clean, finished look from the outside simplifying exhaust routing. Round shield I.D. is 6", commonly used...

Allstar Exhaust Shield Round Single Straight Exit ALL34181 Aluminum shields protect body panels from exhaust exiting thru the passenger door and provide a clean, finished look from the outside simplifying exhaust routing. Round shield I.D. is 6",...

Allstar Check Valve Only for Crankcase Evac Kit ALL34146 Alternate Description CHECK VALVE ONLY FOR CRANKCASE EVAC KIT Part Number ALL34146 Vendor Part Number ALL34146 UPC Code 848238072693 Package Weight 0.45 lbs 0...

Allstar 1:1 Water Pump Pulley ALL31085 Double groove aluminum pulley kits include belts, crank pulley and water pump pulley with a 5/8" diameter hole. Components also sold separately. Alternate Description 1:1 WATER PUMP PULLEY Part Number ...

Allstar Pulley Shim Kit Crank ALL31066 Use shim kits to properly align pulleys. Water pump shims have dual bolt hole pattern to fit most GM and Ford water pumps. Crank pulley spacers are for small block Chevy's. Kits include three shims. Alternate...

Allstar Pulley Shim Kit Water Pump ALL31064 Use shim kits to properly align pulleys. Water pump shims have dual bolt hole pattern to fit most GM and Ford water pumps. Crank pulley spacers are for small block Chevy's. Kits include three shims. ...

Allstar Pulley Guide (Each) ALL31035 Hard-coated aluminum pulley guide helps retain drive belt. Guide is .085" thick with a 1.00" ID, 1/8" keyway slot, and a 2.500" OD. The same guide is found in ALL31031 Mandrel Kits. Sold each. Alternate...

Allstar Stepped Washer For 31030 Pulley ALL31034 Kit prevents mandrel bolt breakage and is made specifically for use with Allstar ALL31030 crank pulley. Mandrel is attached to the crankshaft pulley with three bolts, while the vibration damper is retained...

Allstar Crank Pulley Mandrel ALL31032 Kit prevents mandrel bolt breakage and is made specifically for use with Allstar ALL31030 crank pulley. Mandrel is attached to the crankshaft pulley with three bolts, while the vibration damper is retained with the...

Allstar Crank Pulley 2 Groove 4.750in Dia ALL31030 Specifically for short or Corvette water pumps, pulleys work with power steering pump and pulley to provide a ratio within the GM specified RPM range. Race engine RPM differs greatly from street engines...

Allstar Air Cleaner Kit 14in Black w/1.00 Spacer ALL26099 Low profile, spun aluminum air cleaner kits have a plain or black finished lid, a base for carburetors with 5-1/8" necks and O-ring spacers for a positive seal. Elements sold separately. ...

Allstar Air Cleaner Kit 14in w/1.00 Spacer ALL26098 Low profile, spun aluminum air cleaner kits have a plain or black finished lid, a base for carburetors with 5-1/8" necks and O-ring spacers for a positive seal. Elements sold separately. Alternate...