Engine & Exhaust

Allstar Breather Tank w/2 bungs ALL36109 Aluminum breather tanks are 11-1/2" x 3", include mounting bracket, clamp on breather element, drain, and one or two 3/8"NPT bung(s). ALL36109 can vent two systems. Ideal for dry sumps and rear ends. ...

Allstar Header Wrap Natural 2in x 100ft ALL34247 Reduce under hood temperature while containing header tube heat for increased power. Fiberglass woven wrap is available in natural or black rolls. Alternate Description HEADER WRAP NATURAL 2IN X...

Allstar Exhaust Shield Oval Dual Straight Exit ALL34183 Aluminum shields protect body panels from exhaust exiting thru the passenger door and provide a clean, finished look from the outside simplifying exhaust routing. Round shield I.D. is 6", commonly...

Allstar Exhaust Shield Oval Dual Angle Exit ALL34182 Aluminum shields protect body panels from exhaust exiting thru the passenger door and provide a clean, finished look from the outside simplifying exhaust routing. Round shield I.D. is 6", commonly used...

Allstar Exhaust Shield Round Single Straight Exit ALL34181 Aluminum shields protect body panels from exhaust exiting thru the passenger door and provide a clean, finished look from the outside simplifying exhaust routing. Round shield I.D. is 6",...

Allstar 1:1 Water Pump Pulley ALL31085 Double groove aluminum pulley kits include belts, crank pulley and water pump pulley with a 5/8" diameter hole. Components also sold separately. Alternate Description 1:1 WATER PUMP PULLEY Part Number ...

Allstar Water Pump Pulley 6.625in Dia 3/4in Pilot ALL31050 Specifically for short or Corvette water pumps, pulleys work with power steering pump and pulley to provide a ratio within the GM specified RPM range. Race engine RPM differs greatly from street...

Allstar Water Pump Pulley 6.625in Dia 5/8in Pilot ALL31040 Specifically for short or Corvette water pumps, pulleys work with power steering pump and pulley to provide a ratio within the GM specified RPM range. Race engine RPM differs greatly from street...

Allstar Crank Pulley Mandrel ALL31032 Kit prevents mandrel bolt breakage and is made specifically for use with Allstar ALL31030 crank pulley. Mandrel is attached to the crankshaft pulley with three bolts, while the vibration damper is retained with the...

Allstar Crank Pulley 2 Groove 4.750in Dia ALL31030 Specifically for short or Corvette water pumps, pulleys work with power steering pump and pulley to provide a ratio within the GM specified RPM range. Race engine RPM differs greatly from street engines...

Allstar Power Steering V-belt Pulley Power Steering Pulley - V-Belt - 1 Groove - 6 in Diameter - Aluminum - Black Paint - Allstar Type 2 PS Pump - Each Alternate Description PULLEY FOR ALL48252 Part Number ALL48253 Vendor Part Number ...

Allstar Motor Mount Kit ALL38082 Motor Mount - Bolt-On - Steel - Black Powder Coat - GM A-Body / G-Body Crossmember - Pair Alternate Description MOTOR MOUNT KIT Part Number ALL38082 Vendor Part Number ALL38082 UPC Code ...