Allstar Residual Check Valve 2lb ALL41048 Residual check valves hold a small amount of pressure in the brake system to keep the brake system functioning properly while helping to maintain a firm pedal. Maintaining system pressure prevents fluid from...

Allstar Mounting Bracket Vertical ALL41046 Brackets provide a secure mount for combination valves allowing them to be mounted to the frame or directly under the master cylinder providing access to lines and fittings. Alternate Description ...

Allstar Connector to Brake Warning Switch ALL41044 Multi-purpose valves are used in the brake system to properly distribute fluid to the front and rear brakes to meter the amount of fluid and pressure delivered to each brake and to provide for connection...

Allstar Brake Pedal Rod 9in 3/8in-24 ALL41028 Steel extensions have 3/8"-24 threads and are often used to connect the brake pedal to the master cylinder or booster using a female rod end or a clevis. Alternate Description BRAKE PEDAL ROD 9IN...

Allstar Brake Pedal Rod 4-3/4in 3/8in-24 ALL41027 Steel extensions have 3/8"-24 threads and are often used to connect the brake pedal to the master cylinder or booster using a female rod end or a clevis. Alternate Description BRAKE PEDAL ROD...

Allstar In-line Blower 3in ALL13010 Many uses include cooling brake systems or assisting helmet cooling efforts. Alternate Description IN-LINE BLOWER 3IN Part Number ALL13010 Vendor Part Number ALL13010 UPC Code 848238003727 ...

Allstar In-line Blower 4in HD ALL13009 Many uses include cooling brake systems or assisting helmet cooling efforts. CFM ratings at 13.6 volts with a 3.5 amp draw. Alternate Description IN-LINE BLOWER 4IN HD Part Number ALL13009 Vendor...

Allstar Adapter for Brake Press Gauge to Metric Caliper ALL11022 Gauge temporarily replaces the bleeder screw in most aftermarket brake calipers with 1/4"-28 thread bleeder screws to measure brake pressure. Swivel head positions the 2-3/4" diameter gauge...

Allstar Hybrid Brake Bracket Left ALL42118 Brake Caliper Bracket - Front - Driver Side Mount - Steel - Black Powder Coat - Hybrid Rotor - GM Metric Caliper - Mustang II / Pinto - Each Alternate Description HYBRID BRAKE BRACKET LEFT Part...

Allstar GM Brake Rotor Rear ALL42095 Brake Rotor - 11.625 in OD - 0.790 in Thick - 5 x 4.75 in Bolt Pattern - Iron - Each Alternate Description GM BRAKE ROTOR REAR Part Number ALL42095 Vendor Part Number ALL42095 UPC Code ...

Allstar Hub/Rotor Granada 4.50in BC ALL42090 Rotor is often used when converting stock Mustang II brake assemblies to 11" O.D. x .875" brake rotors and larger calipers. Rotors include new bearing races and install directly to Mustang II spindles with...

Allstar GM Caliper Metric LH 78-87 ALL42084 Stock style calipers are perfect replacements on most GM vehicles and will fit up to 1" wide rotor. Metric inlet thread is 10mm x 1.50 pitch. Big GM inlet thread is 7/16"-20. Alternate Description GM...