Brakes

Allstar Distribution Block w/ Proportioning Valve ALL48037 Distribution block connects brake lines from the master cylinder to front and rear brakes with the added benefit of a rear proportioning valve and built-in pressure activated brake light switch...

Allstar Hub/Rotor Hybrid 5x5in ALL42094 The hybrid rotor combines the versatility of the Granada style hub with a reduced diameter and width. Rotor is a popular choice when used with Mustang II spindles, metric style brake calipers and hybrid caliper...

Allstar Brake Pressure Gauge Kit ALL11026 Brake pressure gauge kit includes two gauges allowing one gauge to be used in the front and one in the rear brake system. Compare front to rear pressures to help diagnose problems or to preset your brake bias...

Allstar 78-87 GM Metric Brake Pads ALL99157 Brake Pads, GM Metric Caliper, Allstar Mustang II Front Brake Kits, Set of 4 Product Info Alternate Description BRAKE PADS 1978-88 GM METRIC Part Number ALL99157 Vendor Part Number ...

Allstar Repl 42074-7 Spring- Ball- Set Screw ALL99117 Brake Bias Hardware, Ball / Set Screw / Spring, Allstar Brake Bias Adjusters, Kit Alternate Description REPL 42074-7 SPRING- BALL- SET SCREW Part Number ALL99117 Vendor Part Number ...

Allstar Repl Brake Adj Cable ALL99116 Brake Bias Cable, 5 ft Long, Allstar Cable Style Brake Bias Adjusters, Each Alternate Description REPL BRAKE ADJ CABLE Part Number ALL99116 Vendor Part Number ALL99116 UPC Code 848238044195 ...

Allstar Proportioning Valve ALL48025 Adjust front-to-rear brake bias with the twist of a knob. Provides up to 57% reduction. Fitting ports are 1/8"NPT. Valve includes two fittings to adapt to 3/16" brake line. 1" long, 1-3/4" wide and 3-5/16" tall. ...

Allstar Caliper Bracket Metric Clamp On w/ Gussets ALL42186 Made from 1/4" thick steel, brackets fit 3" diameter axle housings and work with 11.75" diameter rotors. Available for many setups Alternate Description CALIPER BRACKET METRIC CLAMP ON...

Allstar Caliper Bracket Metric Clamp On ALL42185 Made from 1/4" thick steel, brackets fit 3" diameter axle housings and work with 11.75" diameter rotors. Available for many setups Alternate Description CALIPER BRACKET METRIC CLAMP ON Part...

Allstar Caliper Bracket Right Rear GM 7.5 ALL42181 Steel bolt-on brackets are used when converting drum brake equipped 7.5" GM style rear ends to disc brakes. 1/4" thick brackets replace the drum brake backing plates to provide secure mounting for...

Allstar Caliper Bracket Left Rear GM 7.5 ALL42180 Steel bolt-on brackets are used when converting drum brake equipped 7.5" GM style rear ends to disc brakes. 1/4" thick brackets replace the drum brake backing plates to provide secure mounting for...

Allstar Brake Duct Hose Flange 3in. ALL42160 Flange rivets to nosepiece. 3" diameter brake duct hose can then be hose clamped to flange. Alternate Description BRAKE DUCT HOSE FLANGE 3IN. Part Number ALL42160 Vendor Part Number ...