Brakes

Alternate Description BRAKE ROTOR BOLT KIT 5/16IN-24 Part Number ALL42036 Vendor Part Number ALL42036 UPC Code 848238095296 Package Weight 0.47 lbs 0.21 kg Package Length 7 in 17.78 cm Package...

Part Number ALL42010 Vendor Part Number ALL42010 UPC Code 848238094817 Spec Sheet Allstar Spec Sheet

Allstar Brake Duct Offset Single Hole ALL42141 Ducts direct outside air to brakes, oil coolers and the driver. 3" O.D. with centered, offset or dual outlets. Alternate Description BRAKE DUCT OFFSET SINGLE HOLE Part Number ALL42141 Vendor...

Allstar In-line Blower 3in HD ALL13008 Many uses include cooling brake systems or assisting helmet cooling efforts. CFM ratings at 13.6 volts with a 3.5 amp draw. Alternate Description IN-LINE BLOWER 3IN HD Part Number ALL13008 Vendor...

AMC Pacer Spindle Caliper Bracket for GM Metric Caliper Hybrid 10-1/8" Rotor ALL55962 Caliper Bracket for GM Metric Caliper Hybrid 10-1/8" Rotor   Product Info   Alternate Description CALIPER BRACKET KIT FOR AMC PACER SPINDLE Part...

Allstar 78-87 GM Metric Brake Pads ALL99157 Brake Pads, GM Metric Caliper, Allstar Mustang II Front Brake Kits, Set of 4 Product Info Alternate Description BRAKE PADS 1978-88 GM METRIC Part Number ALL99157 Vendor Part Number ...

Allstar ALL99117 Brake Bias Hardware Kit Brake Bias Hardware, Ball / Set Screw / Spring, Allstar Brake Bias Adjusters, Kit Alternate Description REPL 42074-7 SPRING- BALL- SET SCREW Part Number ALL99117 Vendor Part Number ALL99117 ...

Allstar Repl Brake Adj Cable ALL99116 Brake Bias Cable, 5 ft Long, Allstar Cable Style Brake Bias Adjusters, Each Alternate Description REPL BRAKE ADJ CABLE Part Number ALL99116 Vendor Part Number ALL99116 UPC Code 848238044195 ...

Allstar Proportioning Valve ALL48025 Adjust front-to-rear brake bias with the twist of a knob. Provides up to 57% reduction. Fitting ports are 1/8"NPT. Valve includes two fittings to adapt to 3/16" brake line. 1" long, 1-3/4" wide and 3-5/16" tall. ...

Allstar Caliper Bracket Metric Clamp On w/ Gussets ALL42186 Made from 1/4" thick steel, brackets fit 3" diameter axle housings and work with 11.75" diameter rotors. Available for many setups Alternate Description CALIPER BRACKET METRIC CLAMP ON W/...

Allstar Caliper Bracket Metric Clamp On ALL42185 Made from 1/4" thick steel, brackets fit 3" diameter axle housings and work with 11.75" diameter rotors. Available for many setups Alternate Description CALIPER BRACKET METRIC CLAMP ON Part...

Allstar Caliper Bracket Right Rear GM 7.5 ALL42181 Steel bolt-on brackets are used when converting drum brake equipped 7.5" GM style rear ends to disc brakes. 1/4" thick brackets replace the drum brake backing plates to provide secure mounting for...