Brakes

Allstar Master Cylinder 1in Bore 3/8in Ports Cast Iron ALL41060 Dual reservoir master cylinders have 1" bores and outlet ports on both sides for easy plumbing and installation. Popular master cylinders are used with disc/disc and disc/drum applications...

Allstar Distribution Block w/ Proportioning Valve ALL48037 Distribution block connects brake lines from the master cylinder to front and rear brakes with the added benefit of a rear proportioning valve and built-in pressure activated brake light switch...

Allstar Hub/Rotor Hybrid 5x5in ALL42094 The hybrid rotor combines the versatility of the Granada style hub with a reduced diameter and width. Rotor is a popular choice when used with Mustang II spindles, metric style brake calipers and hybrid caliper...

Allstar Brake Pressure Gauge Kit ALL11026 Brake pressure gauge kit includes two gauges allowing one gauge to be used in the front and one in the rear brake system. Compare front to rear pressures to help diagnose problems or to preset your brake bias...

Allstar Brake Duct Hose 4 x 10ft Black 300 Deg ALL42154 Flexible, non-kink hose directs air from front ducts to spindle ducts. Available in 10 ft. lengths and three temperature ranges. Alternate Description BRAKE DUCT HOSE 4 X 10FT BLACK 300 DEG...

Allstar Brake Duct Hose 3 x 10ft Black 300 Deg ALL42151 Flexible, non-kink hose directs air from front ducts to spindle ducts. Available in 10 ft. lengths and three temperature ranges. Alternate Description BRAKE DUCT HOSE 3 X 10FT BLACK 300 DEG...

Allstar Rotor Hat 2.5in Aluminum ALL42129 Cast aluminum hats are available in two offsets, fits 8-bolt rotors with 7" bolt circle mount, have a 3.060" dia. centering hole and fit axle flanges with up to 6.050" diameter. Drilled for use with 1/2" wheel...

Allstar Rotor Hat 3in Aluminum ALL42128 Cast aluminum hats are available in two offsets, fits 8-bolt rotors with 7" bolt circle mount, have a 3.060" dia. centering hole and fit axle flanges with up to 6.050" diameter. Drilled for use with 1/2" wheel...

Allstar Hub/Rotor M/C 1982-88 5 on 5.00in BC ALL42088 New stock replacement brake rotor includes new bearing races and studs for most intermediate sized Metric chassis cars including Monte Carlo, Grand Prix, and Regal. Rotors measure 10.5" O.D. x 1.03"...

Allstar Brake Bias Adjuster Short 3/8in ALL42074 Know exactly where brake adjustments are set, no more guessing the correct setting. When the adjusting knob is turned, the pointer moves along the reference scale. Adjuster body can be pivoted for easy...

Allstar Rotor Steel 8 Bolt .250 Scalloped ALL42011 Lightweight solid rotor for Late Models and Modifieds. Use anywhere reduction of un-sprung weight is desirable. Rotor is scalloped to provide maximum weight loss without compromising braking performance...

Allstar Rotor RH 8 Bolt 40 Vane 1.25x11.75 Vented ALL42005 Heavy duty 40 vane brake rotors provide added strength and cooling over standard 36 vane rotors. 11.75" x 1.25" 8 bolt rotors weigh just 11 pounds and have ball milled slots to keep rotor clean. ...