Chassis

Allstar Slotted Upper A-Arm Bracket Kit ALL60077 Kits contains (2) slotted brackets, (2) centered bushings, (2) reducer spacers for 5/8" rod end along with a 1/2" bolt and nyloc nut. Offset aluminum bushings(sold separately) allow for plenty of...

Allstar 1/8in Flat Tab 3/8 Hole 4pk ALL60076 Mild steel flat tabs have a straight edge and can be welded parallel to round tubing, square tubing or flat plate. Alternate Description 1/8IN FLAT TAB 3/8 HOLE 4PK Part Number ALL60076 ...

Allstar Tie Down Chassis Rings 2pk ALL60075 Steel brackets weld to chassis and provide a secure mounting location to hook a tie down strap or winch cable. Set of 2. Alternate Description TIE DOWN CHASSIS RINGS 2PK Part Number ALL60075 ...

Allstar D-Ring Backing Plate ALL60074 Backing plate strengthens and reinforces the mounting area of Allstar recessed D-rings. Plate may also be used as a template when installing D-rings and is bare steel allowing plate to be welded in place...

Allstar Universal Chassis Mount ALL60072 Universal formed bracket is 1/8" thick and welds on for many uses including a body mount when modifying or fabricating chassis or as a rear engine mount bracket when used with rear motor mounts. Bracket is 2-1/4"...

Allstar Universal Chassis Mount 1/2in Hole ALL60068 Universal gusseted bracket is 3/16" thick and welds on for many uses including engine and body mounts. Bracket is 2-1/4" wide x 3-1/4" long and has a 1/2" hole located 1" from the end of the bracket. ...

Allstar Universal Hood Pin Mount 1/2in Hole ALL60067 Universal bracket with 1/4" mounting holes can be bolted on or welded in place. Bracket accepts 1/2" hood pins to secure hood and deck lids along with many other uses. Constructed of .100" steel,...

Allstar Upper Link Chassis Brkt ALL60066 Weld-on brackets have curved 3/4" slots to maintain pinion angle as the 3rd link is raised or lowered. Both brackets are notched for 1-3/4" round tubing and are 3/16" thick. Alternate Description UPPER...

Allstar Upper Link Chassis Brkt ALL60065 Weld-on brackets have curved 3/4" slots to maintain pinion angle as the 3rd link is raised or lowered. Both brackets are notched for 1-3/4" round tubing and are 3/16" thick. Alternate Description UPPER...

Allstar 1/8in Radius Tabs 1/4in Hole 4pk ALL60041 Mild steel tabs have built-in gussets for added support. Choose tabs that mount parallel or perpendicular to tubing. Package of four. Alternate Description 1/8IN RADIUS TABS 1/4IN HOLE 4PK ...

Allstar Seat Bracket Bottom ALL60033 Made from 1/8" thick mild steel. Upper bracket is angled to fit against the back of most aluminum racing seats, two-piece design allows front-to-back and side-to-side adjustment. Upper mount brackets may be bolted or...

Allstar Seat Brackets Top 2pc ALL60032 Made from 1/8" thick mild steel. Upper bracket is angled to fit against the back of most aluminum racing seats, two-piece design allows front-to-back and side-to-side adjustment. Upper mount brackets may be bolted...