Engine

Allstar Power Steering Pump w/Pulley and Reservoir ALL48245 Aluminum Type II style power steering pump with 6" diameter pulley and integral fluid reservoir provides smooth, consistent steering. Pump is rated at 3 gallons per minute and produces up to...

Allstar S10 Conversion Kit V8 TH350 2WD ALL38251 S10 Conversion kits are a good starting point when installing a small block Chevy/TH350 transmission combination into most 1982-up S-10, S-15, Jimmy or Blazer. Additional components and fabrication will be...

Allstar Conversion Kit S10 V8 TH350 2WD ALL38250 Conversion kits are a good starting point when installing a small block Chevy/TH350 transmission combination into most 1982-up S-10, S-15, Jimmy or Blazer. Additional components and fabrication will be...

Allstar Conversion Kit 302 Ranger ALL38200 Conversion kits are a good starting point when installing a 289 - 302 with a C-4 transmission combination into a 1982-97 Ranger 2WD. Additional components and fabrication will be required depending on engine and...

Allstar Performance Engine Midplate ALL38132 Motor Plate, Mid, 5/8" Offset, 1/4" Thick, Aluminum, Black Powder Coat, Small Block Chevy, Each Alternate Description ENGINE MIDPLATE Part Number ALL38132 Vendor Part Number ALL38132 UPC...

Allstar Motor Plate BBC Front ALL38124 Motor plates are used to replace the front motor mounts allowing relocation of the engine in the chassis, including lowering or when moving the engine back in the chassis. Plates prevent engine movement and...

Allstar Motor Plate SBC Front ALL38120 Motor plates are used to replace the front motor mounts allowing relocation of the engine in the chassis, including lowering or when moving the engine back in the chassis. Plates prevent engine movement and...

Allstar Motor Mount Stock Ford Ranger V8 Conversion ALL38116 Replacement rubber mount for Allstar Ford Ranger V8 conversion kit. Mount bolts to the engine. Alternate Description MOTOR MOUNT STOCK FORD RANGER V8 CONVERSION Part...

Allstar Motor Mount Stock GM S-10 Conversion ALL38115 Replacement rubber mount for Allstar S-10 conversion kit. Mount bolts to chassis. Alternate Description MOTOR MOUNT STOCK GM S-10 CONVERSION Part Number ALL38115 Vendor Part...

Allstar Motor Mounts SBC Front 1in Offset 1pr ALL38108 Mounts are designed for fabricated chassis or stock chassis that have fabricated motor mounts attached to the frame. Solid style mounts bolt in place of stock motor mounts on standard Chevy engines...

Allstar Motor Mount SBC Rear Raised 1in ALL38064 Use these mounts to raise the engine in the chassis instead of spacers and longer bolts. Use when changing from a dry sump to a wet sump engine or when extra clearance is required. 1" or 1-1/2" raised...

Allstar Mini Breather Tank 1.75in ALL36141 Small capacity, aluminum tank will vent dry sump tank, transmission, or rear end. Tank measures 6-3/4" overall, features a 1/4" NPT bung on bottom for connecting a vent hose and includes a washable breather...