Description
Allstar Ford 9in Axle 31 Spline 29-1/2in ALL67500
Cut to fit 31 spline axles for Ford 9" rear ends are a great alternative to custom axles for street, drag racing and circle track use. Axles are drilled for .687" press-in style wheel studs and have multiple wheel bolt patterns for 5 on 4.5", 4.75 and 5" bolt circles. Axles have .470" thick flanges with a 5.94" outer diameter and a 3.06 hub register to center most rotors and drums. 31-spline axle has a 3.150" O.D. bearing installed for housing with Big Ford (New Style) ends, a press-on sleeve to retain bearing to the axle and an axle retainer. Wheel studs sold separately.
Alternate Description | FORD 9IN AXLE 31 SPLINE 29-1/2IN | ||
Part Number | ALL67500 | ||
Vendor Part Number | ALL67500 | ||
UPC Code | 848238067903 | ||
Package Weight |
| ||
Package Length |
| ||
Package Width |
| ||
Package Height |
| ||
Product Line | Cut to Fit Axles | ||
Axle Length | 29.5 in | ||
Inside Spline | 31 | ||
Outside Diameter | 5.94 in | ||
Spline Length | 10 in | ||
Gun Drilled | Yes | ||
Axle Style | Flange | ||
Wheel Bolt Pattern | 5 x 4.5 in|4 x 4.75 in|5 x 5 in | ||
Wheel Bearing Included | No | ||
Wheel Stud Type | Press-In | ||
Bearing Plate Included | Yes | ||
Location | Rear | ||
Material | Steel | ||
Color | Natural | ||
Finish | Natural | ||
Quantity | Each | ||
Note | Stud Hole Size 0.687 in |
Spec Sheet
WARNING: These products may contain a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.