Suspension

Allstar Jacobs Ladder Pin Clip 3/8in Locking Shock Clip ALL55097 Pin kits offer a quick option for changing out a Jacobs Ladder. Kits include two 3/8" x 3-3/4" long strap pins, one 3/8"or 1/2" x 1-1/2" long pin for birdcage rod end, 3 clips and two...

Allstar Clevis Kit for Bert Transmission ALL54128 Aluminum clevises have 1/2" inside spacing with 3/8" mounting holes and 3/8"-24 RH threads to connect Allstar and most other shifters to Bert transmission. Two clevises per kit with jam nuts. ...

Allstar Steering Shaft Rod End Kit ALL52132 Mounts to steering column bracket to hold steering shaft in place. Kit includes one rod end and two steel 3/4" RH jam nuts. Rod end is .757" I.D. (.007" oversized) to slide over a 3/4" O.D. shaft. ...

Allstar Brake Pedal Clevis 3/8in-24 ALL41026 Clevis fastens to the brake pedal arm to accept a threaded rod extension or power brake booster pushrod. Clevis is threaded for a 3/8"-24 rod and has a 3/8" pin. Alternate Description BRAKE PEDAL...

Allstar High Mis-Alignment Spacers 3/4-5/8in 1pr ALL18787 Dual purpose spacers reduce fastener size mounting hole and allow the rod end to rotate more than 30 degrees in each direction which is 25% more than most standard spacers. Stainless steel spacers...

Allstar High Mis-Alignment Spacers 3/4-1/2in 1pr ALL18786 Dual purpose spacers reduce fastener size mounting hole and allow the rod end to rotate more than 30 degrees in each direction which is 25% more than most standard spacers. Stainless steel spacers...

Allstar High Mis-Alignment Spacers 5/8-1/2in 1pr ALL18785 Dual purpose spacers reduce fastener size mounting hole and allow the rod end to rotate more than 30 degrees in each direction which is 25% more than most standard spacers. Stainless steel spacers...

Allstar Replacement Shock Pin O-ring and Bolt for 12212 ALL12213Replacement rack pin kit for Allstar Shock Rack Item Specifics Alternate Description REPLACEMENT SHOCK PIN ORING AND BOLT FOR 12212 Part Number ALL12213 Vendor Part...

Allstar Sprint Drag Link Tether ALL10252 Keeps drag link tethered to the chassis if it becomes disconnected. Tethering of drag link is required by most sanctioning bodies. 22" long x 1" wide, woven nylon. Alternate Description SPRINT DRAG LINK...