Allstar Performance
Punch and Flare Tool 1-1/2in ALL11070
- SKU:
- ALL11070
- UPC:
- 848238002966
Description
Allstar Punch and Flare Tool 1-1/2in ALL11070
Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small center hole, the punch halves bolt together to cut and flare at the same time. Note: This tool will cut a hole in up to 20 gauge (.0359") steel or 18 gauge (.0403") aluminum. Hole size is increased about 1/8" when hole is flared.
| Alternate Description | PUNCH AND FLARE TOOL 1-1/2IN | ||
| Part Number | ALL11070 | ||
| Vendor Part Number | ALL11070 | ||
| UPC Code | 848238002966 | ||
| Package Weight |
| ||
| Package Length |
| ||
| Package Width |
| ||
| Package Height |
|
Spec Sheet
Instruction sheet
WARNING: These products may contain a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Related Products
Punch and Flare Tool 2-1/2in ALL11075
Allstar Performance
Punch and Flare Tool 2in ALL11074
Allstar Performance
Punch and Flare Tool 1-3/4in ALL11072
Allstar Performance
Punch and Flare Tool 3in ALL11078
Allstar Performance
Punch and Flare Tool 2-5/8in ALL11076
Allstar Performance
Inverted Flare Nut 1/2in-20 for 1/4in Line ALL50118
Allstar Performance
Inverted Flare Nut 1/2in-20 for 3/16in Line ALL50114
Allstar Performance
Inverted Flare Nut 1/2in-20 for 5/16in Line ALL50140
Allstar Performance
Hourglass Spacers 1/2in ID x 1-1/2in OD x 1-1/2in Long ALL18836
Allstar Performance