Tools, Shop & Pit

Allstar Offset Tin Snips Red Straight and LH Cut ALL11030 Durable tin snips have offset blades to keep hands clear of metal while cutting. Non-slip jaws cut through sheet aluminum and up to 18 gauge low carbon steel. Blade length 1-1/4", total tool...

Allstar Shrinker Stretcher Combo 2 Bases 2 Jaws ALL11024 Make smooth radius curves and con-tours with Allstar's shrinker/stretcher combo. Shrinker creates inside curves and stretcher expands for outside curves. Each completely assembled tool includes a...

Allstar Shrinker Stretcher Combo 1 Base 2 Jaws ALL11023 Make smooth radius curves and con-tours with Allstar's shrinker/stretcher combo. Shrinker creates inside curves and stretcher expands for outside curves. Each completely assembled tool includes a...

Allstar Bleeder Bottle w/Lanyard ALL11019 Contain the mess of bleeding brakes by capturing fluid in this 16oz. bottle with a 12" long hose which attaches to most bleeder screws. The removable cap has a built-in fitting to secure the hose during storage...

Allstar Bleeder Bottle w/Magnet ALL11018 Contain the mess of bleeding brakes by capturing fluid in this 16oz. bottle with a 12" long hose which attaches to most bleeder screws. The removable cap has a built-in fitting to secure the hose during storage to...

Allstar Double Flare Tool 45 Deg ALL11015 Double flares 3/16", 1/4", 5/16", 3/8" and 1/2" steel or aluminum and .040" copper tubing at 45 degrees, the most common flare used in custom brake and fuel lines. Includes detailed instructions and a convenient...

Allstar Standard Tubing Cutter ALL11011 Cut plastic, aluminum, copper or steel tubing without distorting or crushing. Standard cutter works with tubing from 1/8" up to 1-1/8" and has wide rollers for even tracking of cutter wheel, built in reamer for...

Allstar Mini Tubing Cutter ALL11010 Cut plastic, aluminum, copper or steel tubing without distorting or crushing. Standard cutter works with tubing from 1/8" up to 1-1/8" and has wide rollers for even tracking of cutter wheel, built in reamer for...

Allstar Wire Tie Tool ALL11005 Tired of cuts from wire ties that have been trimmed with standard wire cutters? This tool does a great job of drawing ties tight around bundles of wires or cables in tight areas and easily cuts flush with a twist of the...

Allstar Wire and Cable Cutters ALL11003 Capable of cutting copper stranded wire from 20 gauge primary wire to 1/0 gauge battery cable. These specially designed cutters will not flatten wire during cutting which is helpful when installing connectors and...

Allstar Replacement Blades For ALL11000Replacement Blad For Braided Hose Cutter 1-3/8 in Long Alternate Description REPLACEMENT BLADES FOR ALL11000 Part Number ALL11002 Vendor Part Number ALL11002 UPC Code 848238002737 ...

Allstar Braided Hose Cutter ALL11000 Tired of the jagged edges left after cutting braided hose with a hacksaw? Heavy-duty hose cutter makes clean, snag-free cuts every time. 1-3/8" forged steel jaws will cut up to AN20 steel braided hose. Alternate...