Rear End

Allstar 9in Floater Bare Housing 63in w/2in Offset ALL68708 Housings are jig welded for correct alignment using all new components including a fabricated center section, new 3" O.D. x 3/16" wall axle tubes and include a vent fitting, carrier mounting...

Allstar 9in Floater Bare Housing 60in Centered ALL68700 Housings are jig welded for correct alignment using all new components including a fabricated center section, new 3" O.D. x 3/16" wall axle tubes and include a vent fitting, carrier mounting studs,...

Allstar Pinion Support 28spl Daytona Forged Alum BK ALL68396 Pinion Support, Daytona Style, Race Installed, Black Anodize, 28 Spline, Ford 9 in, Each Alternate Description PINION SUPPORT 28SPL DAYTONA FORGED ALUM BK Part Number ALL68396 ...

Allstar Yoke Ford 9 28spl Billet Alum 1310 U-Joint ALL68384 Pinion Yoke, Aluminum, 28 Spline, Natural, 1310 U-Joint, Ford 9 in, Each Product Info Alternate Description YOKE FORD 9 28SPL BILLET ALUM 1310 U-JOINT Part Number ALL68384 ...

Allstar Yoke Ford 9 35spl Forged 1350 U-Joint ALL68382 Pinion Yoke, Steel, 35 Spline, Natural, 1350 U-Joint, Ford 9 in, Each Product Info Alternate Description YOKE FORD 9 35SPL FORGED 1350 U-JOINT Part Number ALL68382 Vendor Part...

Allstar Yoke Ford 9 28spl Forged 1350 U-Joint ALL68380 Pinion Yoke, Steel, 28 Spline, Natural, 1350 U-Joint, Ford 9 in, Each Product Info Alternate Description YOKE FORD 9 28SPL FORGED 1350 U-JOINT Part Number ALL68380 Vendor Part...

Allstar Pinion Centering Jig ALL68370 Pinion centering jig fastens to the rear end housing and locates the pinion centerline when building or narrowing housings. Machined slots are designed to retain most tape measure ends for accurate measurements...

Allstar Ford 9 Truss Support ALL68330 Weld-on support adds strength to rear axle housing and reduces unwanted flex during extreme torque. Constructed of 12 gauge (.108") steel. 36" long x 2" wide. Alternate Description FORD 9 TRUSS SUPPORT ...

Allstar QC Axle Tube Support Brkt ALL68320 ALL68320 attaches to the top of side bell bolts on most quick change rear ends and is notched for clearance of bell support rib on old style rear ends. Brackets have 1/2" holes and mount directly onto a 3" axle...

Allstar 9in Ford Housing Ends Large Bearing Early ALL68309 Housing ends are welded into 3/16" wall x 3" O.D. axle tubes when building a custom width housing or converting to larger axles. Ends feature a stepped design with a beveled welding flange to...

Allstar 9in Ford Housing Ends Large Bearing Late ALL68308 Housing ends are welded into 3/16" wall x 3" O.D. axle tubes when building a custom width housing or converting to larger axles. Ends feature a stepped design with a beveled welding flange to help...

Allstar Weld On Snout 5x5 2.5in Pin RH Thread ALL68304 Weld-on snouts may be used for repairing existing axle tubes or custom building new tubes. Three hub styles are available. Alternate Description WELD ON SNOUT 5X5 2.5IN PIN RH THREAD ...