Punch and Flare Tool 2-5/8in ALL11076

(No reviews yet) Write a Review
SKU:
ALL11076
UPC:
848238002997
$111.99
Frequently bought together:

Description

Allstar Punch and Flare Tool 2-5/8in ALL11076

Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small center hole, the punch halves bolt together to cut and flare at the same time. Note: This tool will cut a hole in up to 20 gauge (.0359") steel or 18 gauge (.0403") aluminum. Hole size is increased about 1/8" when hole is flared.

Alternate Description
PUNCH AND FLARE TOOL 2-5/8IN
Part Number
ALL11076
Vendor Part Number
ALL11076
UPC Code
848238002997
Package Weight
5.56 lbs
2.52 kg
Package Length
4.8 in
12.19 cm
Package Width
4.4 in
11.18 cm
Package Height
4.3 in
10.92 cm

Instruction sheet

pdf.png Allstar Instruction Sheet

warning.png WARNING: These products may contain a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

View AllClose

Related Products

Punch and Flare Tool 2-1/2in ALL11075 Allstar Performance

Punch and Flare Tool 2-1/2in ALL11075

Allstar Performance

$109.99
Allstar Punch and Flare Tool 2-1/2in ALL11075 Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small...
Punch and Flare Tool 3in ALL11078 Allstar Performance

Punch and Flare Tool 3in ALL11078

Allstar Performance

$119.99
Allstar Punch and Flare Tool 3in ALL11078 Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small...
Punch and Flare Tool 2in ALL11074 Allstar Performance

Punch and Flare Tool 2in ALL11074

Allstar Performance

$106.99
Allstar Punch and Flare Tool 2in ALL11074 Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small...
Punch and Flare Tool 1-1/2in ALL11070

Punch and Flare Tool 1-1/2in ALL11070

Allstar Performance

$97.99
Allstar Punch and Flare Tool 1-1/2in ALL11070 Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small...
Punch and Flare Tool 1-3/4in ALL11072 Allstar Performance

Punch and Flare Tool 1-3/4in ALL11072

Allstar Performance

$97.99
Allstar Punch and Flare Tool 1-3/4in ALL11072 Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small...
Inverted Flare Nuts 10pk 3/8 Zinc ALL50142 Allstar Performance

Inverted Flare Nut 5/8in-18 for 3/8in Line ALL50142

Allstar Performance

$5.49
Allstar Inverted Flare Nuts 10pk 3/8 Zinc ALL50142 3/16" and 1/4" flare nuts are used for building custom brake lines. Nuts are available to fit most master cylinders and metering/proportioning...
Smart Tool 8in ALL10113 Allstar Performance

Smart Tool 8in ALL10113

Allstar Performance

$124.99
Allstar Smart Tool 8in ALL10113 Ensure that chassis tubing is level and plumb when building roll cages or checking driveshaft angles. A“hold” button freezes and unfreezes readings which can be...
Double Flare Tool 45 Degree ALL11015 Allstar Performance

Double Flare Tool 45 Degree ALL11015

Allstar Performance

$29.99
Allstar Double Flare Tool 45 Deg ALL11015 Double flares 3/16", 1/4", 5/16", 3/8" and 1/2" steel or aluminum and .040" copper tubing at 45 degrees, the most common flare used in custom brake and fuel...