Allstar Performance
Rear End Brake Line Kit Mod 60in OEM Calipers ALL42056
- SKU:
- ALL42056
- UPC:
- 848238072785
Frequently bought together:
Description
Allstar Rear End Brake Line Kit Mod 60in OEM Calipers ALL42056
Kit is designed to eliminate hanging brake lines near the rear calipers. Rear Brake Line Kits utilize a single line drop located near the left side of the center section. From the drop, the lines tee and run over the top back side of the center section, then across the backside of axle tubes to the calipers. Braided lines are #3 with -4AN ends.
Alternate Description | REAR END BRAKE LINE KIT MOD 60IN OEM CALIPERS | ||
Part Number | ALL42056 | ||
Vendor Part Number | ALL42056 | ||
UPC Code | 848238072785 | ||
Package Weight |
| ||
Package Length |
| ||
Package Width |
| ||
Package Height |
| ||
Number Of Lines | 3 | ||
Front/Rear | Rear | ||
Hose Material | Stainless | ||
PTFE Lined | Yes | ||
Hose A Length | 28 in | ||
Hose A Size | 3 AN | ||
Hose A End 1 Size | 4 AN | ||
Hose A End 1 Style | Female | ||
Hose A End 1 Swivel | Yes | ||
Hose A End 1 Angle | Straight | ||
Hose A End 2 Size | 4 AN | ||
Hose A End 2 Style | Female | ||
Hose A End 2 Swivel | Yes | ||
Hose A End 2 Angle | Straight | ||
Hose B Length | 15 in | ||
Hose B Size | 3 AN | ||
Hose B End 1 Size | 4 AN | ||
Hose B End 1 Style | Female | ||
Hose B End 1 Swivel | Yes | ||
Hose B End 1 Angle | Straight | ||
Hose B End 2 Size | 4 AN | ||
Hose B End 2 Style | Female | ||
Hose B End 2 Swivel | Yes | ||
Hose B End 2 Angle | 90 Degrees | ||
Hose C Length | 42 in | ||
Hose C Size | 3 AN | ||
Hose C End 1 Size | 4 AN | ||
Hose C End 1 Style | Female | ||
Hose C End 1 Swivel | Yes | ||
Hose C End 1 Angle | Straight | ||
Hose C End 2 Size | 4 AN | ||
Hose C End 2 Style | Female | ||
Hose C End 2 Swivel | Yes | ||
Hose C End 2 Angle | 90 Degrees | ||
Hose End Material | Steel | ||
Hose End Color | Zinc | ||
Hose End Finish | Oxide | ||
Fittings Included | Yes | ||
Fitting A Quantity | 2 | ||
Fitting A End 1 Size | 4 AN | ||
Fitting A End 1 Style | Male | ||
Fitting A End 1 Angle | Straight | ||
Fitting A End 2 Size | 10 mm x 1.50 | ||
Fitting A End 2 Style | Male | ||
Fitting A End 2 Angle | Straight | ||
Fitting A Material | Steel | ||
Fitting A Color | Zinc | ||
Fitting A Finish | Oxide | ||
T-Fitting Included | Yes | ||
T-Fitting End 1 Size | 4 AN | ||
T-Fitting End 1 Style | Male | ||
T-Fitting End 2 Size | 4 AN | ||
T-Fitting End 2 Style | Male | ||
T-Fitting End 3 Size | 4 AN | ||
T-Fitting End 3 Style | Male | ||
T-Fitting End 3 Bulkhead | Yes | ||
T-Fitting Material | Aluminum | ||
T-Fitting Color | Black | ||
T-Fitting Finish | Anodize | ||
Bulkhead Nuts Included | Yes | ||
Mounting Brackets Include | Yes | ||
DOT Approved | No | ||
Quantity | Kit |
Spec Sheet
WARNING: These products may contain a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.