Brakes

Allstar Distribution Block w/ Proportioning Valve ALL48037 Distribution block connects brake lines from the master cylinder to front and rear brakes with the added benefit of a rear proportioning valve and built-in pressure activated brake light switch...

Allstar Brake Duct Hose 4 x 10ft Black 300 Deg ALL42154 Flexible, non-kink hose directs air from front ducts to spindle ducts. Available in 10 ft. lengths and three temperature ranges. Alternate Description BRAKE DUCT HOSE 4 X 10FT BLACK 300 DEG...

Allstar Brake Duct Hose 3 x 10ft Black 300 Deg ALL42151 Flexible, non-kink hose directs air from front ducts to spindle ducts. Available in 10 ft. lengths and three temperature ranges. Alternate Description BRAKE DUCT HOSE 3 X 10FT BLACK 300 DEG...

Allstar Rotor RH 8 Bolt 40 Vane 1.25x11.75 Vented ALL42005 Heavy duty 40 vane brake rotors provide added strength and cooling over standard 36 vane rotors. 11.75" x 1.25" 8 bolt rotors weigh just 11 pounds and have ball milled slots to keep rotor clean. ...

Allstar Rotor LH 8 Bolt 40 Vane 1.25x11.75 Vented ALL42004 Heavy duty 40 vane brake rotors provide added strength and cooling over standard 36 vane rotors. 11.75" x 1.25" 8 bolt rotors weigh just 11 pounds and have ball milled slots to keep rotor clean. ...

Allstar Rotor RH 8 Bolt 36 Vane 1.25x11.75 ALL42001 Rotors have 36 directional cooling vanes and are 1-1/4" thick x 11-3/4" dia. Directional cooling vanes allow brakes to run much cooler than conventional rotor designs. Rotors fit solid mounting brake...

Allstar Rotor LH 8 Bolt 36 Vane 1.25x11.75 ALL42000 Rotors have 36 directional cooling vanes and are 1-1/4" thick x 11-3/4" dia. Directional cooling vanes allow brakes to run much cooler than conventional rotor designs. Rotors fit solid mounting brake...

Allstar Pedal Extension Kit 4in Dual Master Cylinder ALL41053 Kits move floor mounted pedals closer to the driver and eliminate the need for extra long seat brackets used to move the driver forward. Now just leave the seat in the desired location and...

Allstar Hub/Rotor Granada 4.75in BC ALL42091 Rotor is often used when converting stock Mustang II brake assemblies to 11" O.D. x .875" brake rotors and larger calipers. Rotors include new bearing races and install directly to Mustang II spindles with...

Allstar Hub/Rotor Granada 5.0in BC w/ 5/8in Studs ALL42089 Rotor is often used when converting stock Mustang II brake assemblies to 11" O.D. x .875" brake rotors and larger calipers. Rotors include new bearing races and install directly to Mustang II...

Allstar Hub/Rotor 1979-81 M/C 5 on 5.00in BC ALL42086 Brake Rotor - Plain - 10.500 in OD - 1.030 in Thick - 5 x 5.00 in Bolt Pattern - Iron - GM Metric Spindle 1979-81 - Each Alternate Description HUB/ROTOR 1979-81 M/C 5 ON 5.00IN BC Part...