Road Race

Allstar Filler Cap Polished with Weld-In Alum Bung Large ALL36173 Kits include a weld-in or bolt-in bung and an easy grip O-ring cap with positive seal. Kits are often used as an inspection plug or a filler plug. Small fill plugs have a 1-3/8" opening,...

Allstar Filler Cap Black with Weld-In Alum Bung Large ALL36171 Kits include a weld-in or bolt-in bung and an easy grip O-ring cap with positive seal. Kits are often used as an inspection plug or a filler plug. Small fill plugs have a 1-3/8" opening, and...

Allstar Power Steering Tank ALL36121 Aluminum tank is 8-1/2" tall overall by 3-1/2" in diameter with a -6AN return fitting on the side and a -10AN fitting on the bottom. A baffle in the return fitting prevents foaming and cavitation. A steel bracket for...

Allstar Power Steering Tank w/Bracket ALL36120 Aluminum tank is 8-1/2" tall overall by 3-1/2" in diameter with a -6AN return fitting on the side and a -10AN fitting on the bottom. A baffle in the return fitting prevents foaming and cavitation. A steel...

Allstar Breather Tank w/2 bungs ALL36109 Aluminum breather tanks are 11-1/2" x 3", include mounting bracket, clamp on breather element, drain, and one or two 3/8"NPT bung(s). ALL36109 can vent two systems. Ideal for dry sumps and rear ends. ...

Allstar Crank Pulley Mandrel ALL31032 Kit prevents mandrel bolt breakage and is made specifically for use with Allstar ALL31030 crank pulley. Mandrel is attached to the crankshaft pulley with three bolts, while the vibration damper is retained with the...

Allstar Crank Pulley 2 Groove 4.750in Dia ALL31030 Specifically for short or Corvette water pumps, pulleys work with power steering pump and pulley to provide a ratio within the GM specified RPM range. Race engine RPM differs greatly from street engines...

Allstar 5' In-line Oil Cooler Aluminum ALL30144 Finned aluminum coolers have 3/4"NPT ends and T-slots for easy mounting. Alternate Description 5' IN-LINE OIL COOLER ALUMINUM Part Number ALL30144 Vendor Part Number ALL30144 UPC...

Allstar Electric Fan 10in Curved Blade ALL30070 Electric fans require very little amperage and are suitable for use in race car or tow vehicle. Fans are set up as puller units, mounted behind the radiator. By flipping blades, reversing wires, and...

Allstar Aluminum Fan Shroud 18-3/4x18-3/4 Single 16 ALL30061 Aluminum shrouds are designed to work with electric fans mounted as a puller mounted behind the radiator. Special air release flaps allow additional airflow to pass through the core and shroud...

Allstar Aluminum Fan Shroud 16-3/4x18-3/4 Single 16 ALL30060 Aluminum shrouds are designed to work with electric fans mounted as a puller mounted behind the radiator. Special air release flaps allow additional airflow to pass through the core and shroud...

Allstar Flexplate 168T STD LS ALL26845 Stock replacement and SFI-approved flexplates are available for small and big block Chevy engines. Gold iridite plated, SFI-approved plates meet 29.1 specs., are .035" thicker than stock and have dual (10-3/4" and...