Allstar Performance
Transfer Punch for 7/16in Q/T Fasteners ALL19403
(No reviews yet)
Write a Review
- SKU:
- ALL19403
- UPC:
- 848238010541
Frequently bought together:
Description
Allstar Transfer Punch for 7/16in Q/T Fasteners ALL19403
For use with quick turn fasteners, place transfer punch in a weld plate or body panel. Position panel over top of punch and lightly tap with a hammer leaving a mark on the panel where hole is to be drilled.
| Alternate Description | TRANSFER PUNCH FOR 7/16IN Q/T FASTENERS | ||
| Part Number | ALL19403 | ||
| Vendor Part Number | ALL19403 | ||
| UPC Code | 848238010541 | ||
| Package Weight |
| ||
| Package Length |
| ||
| Package Width |
| ||
| Package Height |
|
Spec Sheet
Instruction Sheet
WARNING: These products may contain a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Related Products
Transfer Punch for 5/16in Q/T Fasteners ALL19402
Allstar Performance
$3.79
Allstar Transfer Punch for 5/16in Q/T Fasteners ALL19402 For use with quick turn fasteners, place transfer punch in a weld plate or body panel. Position panel over top of punch and lightly tap with a...
Inverted Flare Nut 7/16in-24 for 3/16in Line ALL50113
Allstar Performance
$3.99
Allstar Inverted Flare Nuts for 3/16in w/ 7/16-24 Red ALL50113 3/16" and 1/4" flare nuts are used for building custom brake lines. Nuts are available to fit most master cylinders and...
Valve Lash Wrench 9/16in w/3/16in&7/32in ALL96402
Allstar Performance
$37.99
Allstar Valve Lash Wrench 9/16in w/3/16in&7/32in ALL96402 Allstar Valve Lash Wrenches save precious time and eliminate fumbling with two separate wrenches. Available for Jesel, T&D and other...
Bulkhead Mounting Tab with 7/16in hole ALL60093
Allstar Performance
$4.99
Allstar Bulkhead Mounting Tab with 7/16in hole ALL60093 One piece steel mounting tab with 7/16" hole can be bolted to the chassis or rear end to hold bulkhead fittings in place. Bracket is 5/64"...
Mounting Tabs Weld-on 7/16in Hole 4pk ALL60091
Allstar Performance
$5.99
Allstar Mounting Tabs Weld-on 7/16in Hole 4pk ALL60091 Mild steel flat tabs have a straight edge and can be welded parallel to round tubing, square tubing or flat plate. Alternate Descript