All Categories

Allstar Mustang II Spindle RH Std. Height ALL56309 Mustang II/Pinto spindles are direct replacements for stock O.E. spindles featuring the stock 10° pin inclination and upper and lower ball joint tapers. Spindles accept Granada or Hybrid style rotors...

Allstar Mustang II Spindle LH Std. Height ALL56308 Mustang II/Pinto spindles are direct replacements for stock O.E. spindles featuring the stock 10° pin inclination and upper and lower ball joint tapers. Spindles accept Granada or Hybrid style rotors...

Allstar Std Height Spindles Mustang II Pair ALL56307 Mustang II/Pinto spindles are direct replacements for stock O.E. spindles featuring the stock 10° pin inclination and upper and lower ball joint tapers. Spindles accept Granada or Hybrid style...

Allstar 2in Dropped Spindles Mustang II ALL56305 Mustang II/Pinto spindles are direct replacements for stock O.E. spindles featuring the stock 10° pin inclination and upper and lower ball joint tapers. Spindles accept Granada or Hybrid style rotors...

Allstar IMCA Must II Spindle Right ALL56304 Mustang II/Pinto spindles are direct replacements for stock O.E. spindles featuring the stock 10° pin inclination and upper and lower ball joint tapers. Spindles accept Granada or Hybrid style rotors with...

Allstar IMCA Must II Spindle Left ALL56303 Mustang II/Pinto spindles are direct replacements for stock O.E. spindles featuring the stock 10° pin inclination and upper and lower ball joint tapers. Spindles accept Granada or Hybrid style rotors with...

Allstar Ball Joint Holder Kit Unwelded ALL56298 Kit allows components to be welded at any angle. Stud is 5/8"-18 RH thread, bracket has a 3/8" hole. Holder accepts ALL56214 or Moog K772 style screw-in upper ball joint. Alternate Description BALL...

Allstar Univ. Ball Joint Holder Straight ALL56296 Holders are ideal for those who fabricate their own control arms. The holders have a 5/8" male RH thread and a 3/8" hole, commonly used with a clevis. Holders accept ALL56214 or Moog K772 style screw-in...

Allstar Tie Rod Spacer Steel 2in x 5/8in ID ALL56288 Spacer corrects bump steer on vehicles that use a rod end as an outer tie rod end. Spacer is used between the spindle arm and the rod end. Steel spacer is 2" tall and has a 5/8" hole. Alternate...

Allstar Bump Steer Kit Pinto (long) ALL56286 Studs have 1-1/2" per foot taper and simplify bump steer setting. Attach outer tie rod end to spindle so end can be raised or lowered as needed. Self locking nuts, one .100" and three .300" spacers included...

Allstar Bump Steer Kit Pinto ALL56284 Studs have 1-1/2" per foot taper and simplify bump steer setting. Attach outer tie rod end to spindle so end can be raised or lowered as needed. Self locking nuts, one .100" and three .300" spacers included. ALL56286...

Allstar Bump Steer Kit ALL56280 Studs have 1-1/2" per foot taper and simplify bump steer setting. Attach outer tie rod end to spindle so end can be raised or lowered as needed. Self locking nuts, one .100" and three .300" spacers included. ALL56286 also...