Tools & Pit Equipment

Allstar Caster Plate ALL10752 Not sure if you turned your wheels the same amount each time when adjusting caster settings on your race car? Unless you have expensive turn plates, you're never certain, until now. This quick reference gauge positions under...

Allstar Digital Level 2x2 ALL10742 Digital level with magnetic base measures the angle of a single straight surface or the angle of a joint between two straight surfaces. Displayed value on the LCD screen rotates to right side up when digital level is in...

Cradle Rollers For Ride Height Blocks ALL10723 Built-in rollers allow live axle rear-ends to rotate while on the cradles or when using the rear axle to rotate the engine to check or adjust the valve train. Package of two. Alternate Description ...

Allstar Ride Height Blocks 3-6.25in ALL10721 Chassis set-up blocks are adjustable in 1/4" increments. A quick release pin holds block at desired height. Bottom surfaces of blocks are contoured to fit steel tubing or any flat surface and have magnets for...

Allstar Ride Height Blocks 1.75-4in ALL10720 Chassis set-up blocks are adjustable in 1/4" increments. A quick release pin holds block at desired height. Bottom surfaces of blocks are contoured to fit steel tubing or any flat surface and have magnets for...

Allstar Radiator Fin Comb Kit ALL10680 Hand held tool straightens and repairs damaged fins in most radiators, coolers, and air conditioning condensers. Repairing damaged fins provides better airflow through core increasing cooling ability. Six...

Allstar Bolt Center Caps 1/2in Pair ALL10678 Caps slip over the head of standard 1/2" bolts to accurately measure the center-to-center length of installed suspension tube assemblies. Machined step secures the end of a standard tape measure for easy...

Allstar Suspension Tube Setup Tool ALL10676 Slide rule device quickly measures and duplicates suspension or steering tubes up to 31" long with 1/2", 5/8" and 3/4" rod ends. Set-up tool has an engraved scale with 1/16" increments for durability and...

Allstar Tape Measure 16ft ALL10675 16' x 3/4" blade has fractional markings every 1/8" for quick reference. Alternate Description TAPE MEASURE 16FT Part Number ALL10675 Vendor Part Number ALL10675 UPC Code 848238002607 ...

Allstar Rod End Centering Kit ALL10672 Compact inserts are placed into rod ends of suspension, steering or other tube assemblies to quickly measure and adjust on the workbench or other flat surface with any standard tape measure. Inserts can be used on...

Allstar Performance Dropped Steel Tie Rod Tube 11in ALL57040-11   Dropped Steel tie rod tubes are popular on modifieds and street stocks providing additional clearance on the right front tie rod assembly. Tube is .156" wall, 7/8" OD, with 5/8"-18RH...

Allstar Set Up Plate Wide 5 ALL10662 Set-up plates are used for squaring and stringing chassis to ensure accurate chassis set-up by eliminating wheel and tire differences. Plates are 1/2" thick and can also be used when setting bump steer or checking...