All Categories

Allstar IMCA Must II Spindle Right ALL56304 Mustang II/Pinto spindles are direct replacements for stock O.E. spindles featuring the stock 10° pin inclination and upper and lower ball joint tapers. Spindles accept Granada or Hybrid style rotors with...

Allstar IMCA Must II Spindle Left ALL56303 Mustang II/Pinto spindles are direct replacements for stock O.E. spindles featuring the stock 10° pin inclination and upper and lower ball joint tapers. Spindles accept Granada or Hybrid style rotors with...

Allstar Ball Joint Holder Kit Unwelded ALL56298 Kit allows components to be welded at any angle. Stud is 5/8"-18 RH thread, bracket has a 3/8" hole. Holder accepts ALL56214 or Moog K772 style screw-in upper ball joint. Alternate Description BALL...

Allstar Univ. Ball Joint Holder Straight ALL56296 Holders are ideal for those who fabricate their own control arms. The holders have a 5/8" male RH thread and a 3/8" hole, commonly used with a clevis. Holders accept ALL56214 or Moog K772 style screw-in...

Allstar Tie Rod Spacer Steel 2in x 5/8in ID ALL56288 Spacer corrects bump steer on vehicles that use a rod end as an outer tie rod end. Spacer is used between the spindle arm and the rod end. Steel spacer is 2" tall and has a 5/8" hole. Alternate...

Allstar Bump Steer Kit Pinto (long) ALL56286 Studs have 1-1/2" per foot taper and simplify bump steer setting. Attach outer tie rod end to spindle so end can be raised or lowered as needed. Self locking nuts, one .100" and three .300" spacers included...

Allstar Bump Steer Kit Pinto ALL56284 Studs have 1-1/2" per foot taper and simplify bump steer setting. Attach outer tie rod end to spindle so end can be raised or lowered as needed. Self locking nuts, one .100" and three .300" spacers included. ALL56286...

Allstar Bump Steer Kit ALL56280 Studs have 1-1/2" per foot taper and simplify bump steer setting. Attach outer tie rod end to spindle so end can be raised or lowered as needed. Self locking nuts, one .100" and three .300" spacers included. ALL56286 also...

Allstar Inner Tie Rod Stud ALL56278 Stud replaces the stock inner tie rod end allowing a 5/8" rod end to be used on both ends of the steering link. Inner tie rod stud and rod end combination also provides additional steering clearance than O.E. style...

Allstar Adj Lower Ball Joint Screw-In w/Large GM Pin ALL56276 Replace standard ball joint with an adjustable mono-ball style lower ball joint. Includes housing, mono-ball, adjuster bushings, stud and nut. Alternate Description ADJ LOWER BALL JOINT...

Allstar B/J Stud for 56274 ALL56275 Replace standard ball joint with an adjustable mono-ball style lower ball joint. Includes housing, mono-ball, adjuster bushings, stud and nut. Alternate Description B/J STUD FOR 56274 Part Number ...

Allstar Adj Lower Ball Joint Press-In w/Mid GM Pin ALL56274 Replace standard ball joint with an adjustable mono-ball style lower ball joint. Includes housing, mono-ball, adjuster bushings, stud and nut. Alternate Description ADJ LOWER BALL JOINT...