All Categories

Allstar Collapsible Steering Assy Short ALL52171 Collapsible shaft is designed to be used in-line near the rack and pinion or steering box, allowing steering shaft compression. For proper installation, shaft should be extended when installed. The heavy...

Allstar Collapsible Steering Assy Long ALL52170 Collapsible shaft is designed to be used in-line near the rack and pinion or steering box, allowing steering shaft compression. For proper installation, shaft should be extended when installed. The heavy...

Allstar Shaft Collar 1-1/4in ALL52148 Aluminum, 2-piece shaft collars are used on sway bars and steering column assemblies. Alternate Description SHAFT COLLAR 1-1/4IN Part Number ALL52148 Vendor Part Number ALL52148 UPC Code ...

Allstar Shaft Collar 1-1/8in ALL52146 Aluminum, 2-piece shaft collars are used on sway bars and steering column assemblies. Alternate Description SHAFT COLLAR 1-1/8IN Part Number ALL52146 Vendor Part Number ALL52146 UPC Code ...

Allstar Shaft Collar 1-1/16in ALL52145 Aluminum, 2-piece shaft collars are used on sway bars and steering column assemblies. Alternate Description SHAFT COLLAR 1-1/16IN Part Number ALL52145 Vendor Part Number ALL52145 UPC Code ...

Allstar Shaft Collar 1in ALL52144 Aluminum, 2-piece shaft collars are used on sway bars and steering column assemblies. Alternate Description SHAFT COLLAR 1IN Part Number ALL52144 Vendor Part Number ALL52144 UPC Code ...

Allstar Shaft Collar 7/8in ALL52142 Aluminum, 2-piece shaft collars are used on sway bars and steering column assemblies. Alternate Description SHAFT COLLAR 7/8IN Part Number ALL52142 Vendor Part Number ALL52142 UPC Code ...

Allstar Shaft Collar 3/4in ALL52140 Aluminum, 2-piece shaft collars are used on sway bars and steering column assemblies. Alternate Description SHAFT COLLAR 3/4IN Part Number ALL52140 Vendor Part Number ALL52140 UPC Code ...

Allstar Steering Shaft Rod End Kit ALL52132 Mounts to steering column bracket to hold steering shaft in place. Kit includes one rod end and two steel 3/4" RH jam nuts. Rod end is .757" I.D. (.007" oversized) to slide over a 3/4" O.D. shaft. ...

Allstar Flange Bearing ALL52130 Self-aligning flange bearing has a .757" I.D. and installs in the firewall to accept the steering shaft. includes locking collar. Bearing allows shaft to angle up to 40 degrees. Alternate Description FLANGE...

Allstar Steering Column Bracket 7.5in Clamp On ALL52128 Aluminum bracket clamps to 1-3/4" tubing and is 7-1/2" center to center. Mounting bolts face the seat, so the driver can easily adjust the column up and down while sitting in the seat. An oversize...

Allstar Steering Column Bracket 10in ALL52126 Stamped-steel brackets weld to dash bars to create a mounting point for steering shaft when using a 3/4" oversized rod end. Brackets are 3-1/8" wide and available in a variety of lengths to fit most...