All Categories

Allstar LS D580 Coil Pack ALL81400 Direct replacement 40,000V coils are a good choice when upgrading the OE ignition system in high performance applications or when power adders are used. Sold each. Alternate Description LS COIL D580 Part...

Allstar Inner Wheel Bearing GM Metric Hub 1979-81 ALL72293 Wheel Bearing, Inner, Steel, GM Metric Hub 1979-81, Each Alternate Description BEARING M/C HUB 1979-81 INNER REM FINISHED Part Number ALL72293 Vendor Part Number ALL72293 ...

Allstar Outer Wheel Bearing Mustang II Hubs ALL72292 Wheel Bearing, Outer, Steel, Ford Granada / Mustang II Hubs, Each Alternate Description BEARING GRANADA HUB OUTER REM FINISHED Part Number ALL72292 Vendor Part Number ALL72292 ...

Allstar Inner Wheel Bearing Mustang II Hubs ALL72291 Wheel Bearing, Inner, Steel, Ford Granada / Mustang II Hubs, Each Alternate Description BEARING GRANADA HUB INNER REM FINISHED Part Number ALL72291 Vendor Part Number ALL72291 ...

Allstar Inner Wheel Bearing 2-1/2 in Pin 5x5 Hubs ALL72290 Wheel Bearing, Inner, Steel, 2-1/2 in Pin 5x5 Hubs, Each Alternate Description BEARING 5X5 2.5IN PIN GN REM FINISHED Part Number ALL72290 Vendor Part Number ALL72290 UPC...

Allstar Ford 9IN Housing 60IN Wide Centered ALL68834 Steel Hot Rod housings are built with all new components. The center section is centered, so the pinion yoke is offset approximately 1" to the right allowing for symmetric tube bracketry on each side...

Allstar Ford 9IN Housing 58IN Wide Centered ALL68832 Steel Hot Rod housings are built with all new components. The center section is centered, so the pinion yoke is offset approximately 1" to the right allowing for symmetric tube bracketry on each side...

Allstar Ford 9IN Housing 62IN Wide Centered GN Snouts ALL68824 Housings are jig welded for correct alignment using all new components including a fabricated center section, new 3" O.D. x 3/16" wall axle tubes and include a vent fitting, carrier mounting...

Allstar Ford 9IN Housing 58IN Wide Centered GN Snouts ALL68820 Housings are jig welded for correct alignment using all new components including a fabricated center section, new 3" O.D. x 3/16" wall axle tubes and include a vent fitting, carrier mounting...

Allstar Suspension Limiter Chain Clamp Powder Coat 1-1/8IN ALL68341 Clamps fasten around tubular lower control arms providing a lower mounting point for a suspension limit chain. Clamps are double shear style and accept 5/16" hardware. Alternate...

Allstar Suspension Limiter Chain Clamp Powder Coat 1" ALL68340 Clamps fasten around tubular lower control arms providing a lower mounting point for a suspension limit chain. Clamps are double shear style and accept 5/16" hardware. Alternate...

Allstar Axle Housing Retainer Clamp 3IN ALL68338 Retainer clamp bolts around 3" O.D. axle tubes to keep bird cages, floater brackets and limit chain clamps in position. Two piece design allows clamp to be installed without removing existing brake bracket...